snomobeelr Posted August 3, 2009 Posted August 3, 2009 I didn't take enough Pictures and dont remember what direction the motor mounts/Frame mounts bolt on and the Trasmission Bracket that the shift rod with the Spring faces.
monte70car Posted August 3, 2009 Posted August 3, 2009 My frame mounts are on the back side of the cross member.
snomobeelr Posted August 3, 2009 Author Posted August 3, 2009 so the mount is closer to the Firewall and the 2 fingers face the Core support correct?
kc8oye Posted August 20, 2009 Posted August 20, 2009 yep that's right. if you mean the bracket that attaches to the frame that supports the shift rod. .that's mounted so the 'cup' faces the transmission, as the nylon washer sits down in that cup and is held there by the spring. if you need replacement springs and washers call leo
Recommended Posts