MonteNH Posted October 23, 2011 Posted October 23, 2011 There is a male inlet right dead center from of my Edelbroch 750 carb. There is no hose going to it. It's sucking in air very badly. Should this hose be capped ? Its very loud also and if You put your finger up to it it will suck Your finger right up to it. Quote
MGD72Monte Posted October 23, 2011 Posted October 23, 2011 I don't have an Edelbrock but you shouldn't have an open vacuum port just sucking in ambient air. Are you sure there are no hoses in the area that should be connected to it. If not, i'd cap it pronto. Quote
Ian Posted October 23, 2011 Posted October 23, 2011 It could be for the power brakes, but if not using it for that, plug it with a cap. Quote
Mike 57 Posted October 24, 2011 Posted October 24, 2011 A 3/8 vacuum cap should fix you right up. What was on there before? Quote
MonteNH Posted October 24, 2011 Author Posted October 24, 2011 Im not sure if there was one there. I would like to think I would have noticed but not 100% sure. Quote
wallaby Posted October 24, 2011 Posted October 24, 2011 Could it be for PCV valve? Most of the time power brake fitting is in the rear somewhere. Â Either way, it shouldn't be open and sucking air. It should have a hose going to something or be capped off. Maybe it was capped off and a backfire blew the cap off? Quote
Mo's70MCs Posted October 24, 2011 Posted October 24, 2011 There is a male inlet right dead center from of my Edelbroch 750 carb. There is no hose going to it. It's sucking in air very badly. Should this hose be capped ? Its very loud also and if You put your finger up to it it will suck Your finger right up to it. Â in between the adjustment screws? Isn't that where you hook-up the PCV hose? Most are t-tapped to valve cover,,& so on. Damn it you're quick Mark!! Quote
stangeba Posted October 24, 2011 Posted October 24, 2011 My OEM 71 Quadrajet has a PCV valve hose hooked to a vacuum fitting like you are describing. Here is a picture. Bruce 1971 Quadrajet on a 350 Quote
VE3HZZ Posted October 24, 2011 Posted October 24, 2011 My OEM 71 Quadrajet has a PCV valve hose hooked to a vacuum fitting like you are describing. Here is a picture. Bruce 1971 Quadrajet on a 350  Hey Bruce could you take a picture of the right side (vacuum) I think I maybe missing some things? but don't have a Quad from the era to check or see what it maybe or not.  Thanks  Scott Quote
stangeba Posted October 24, 2011 Posted October 24, 2011 Here is the entire album, hope it helps. 70 may be different than 71. 71 350 Quadrajet Quote
cny first gen 71 Posted October 24, 2011 Posted October 24, 2011 Bruce whats the 3rd linkage hooked to the carb, Is that for the cruise control? Quote
Leghome Posted October 25, 2011 Posted October 25, 2011 The tube on the front of the Eldebrock is for the PCV valve. I just installed a 1406 Eldebrock on my 72 and that is what the instructions said it was for. I had to put a spacer under the carb for the power brake vacuum control. The vacuum advance is on the left side of the PCV valve connection. I had it on the right side and it now runs better than it did. This is while standing in front of the car looking at the carb. Quote
Mo's70MCs Posted October 25, 2011 Posted October 25, 2011 The tube on the front of the Eldebrock is for the PVC valve. I just installed a 1406 Eldebrock on my 72 and that is what the instructions said it was for. I had to put a spacer under the carb for the power brake vacuum control. The vacuum advance is on the left side of the PVC valve connection. I ha it on the right side and it now runs better than it did. This is while standing in front of the car looking at the carb. Â I'm sure you meant "PCV" Quote
stangeba Posted October 25, 2011 Posted October 25, 2011 Steve, Yes, cruise control. I added it about 24 years ago. Bruce Quote
Leghome Posted October 25, 2011 Posted October 25, 2011 Yep Rod ya dun caught me LOL and the miscue is fixededed. Quote
Mo's70MCs Posted October 25, 2011 Posted October 25, 2011 Yep Rod ya dun caught me LOL and the miscue is fixededed. Just keeping you on your toes! Quote
MonteNH Posted October 25, 2011 Author Posted October 25, 2011 I plugged it up and huge differance...lol Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.