420ponies Posted April 25, 2012 Posted April 25, 2012 I'm glad to see you Alex.I hope he gets thru this endeavor.Thankyou again for the rear tailpanel for my '72,7yrs and still looking good.
jacob Posted April 25, 2012 Author Posted April 25, 2012 Got the gages out but i found out that some of the holes for the screws are broken and the circut board tape looking stuff on the back is cut what do i do????????????????????????????????????????
Mo's70MCs Posted April 25, 2012 Posted April 25, 2012 Got the gages out but i found out that some of the holes for the screws are broken and the circut board tape looking stuff on the back is cut what do i do???????????????????????????????????????? Fix the holes & install new circuit board.
jacob Posted April 26, 2012 Author Posted April 26, 2012 could you drive the car with it like that???????????
Wiham Posted April 26, 2012 Posted April 26, 2012 Like what? With the holes broken? Probably, but your gauges would fit loose in the dash, if they stay in at all. I'd not recommend it.
jacob Posted April 26, 2012 Author Posted April 26, 2012 not all of the holes are broken just the ones on the left side where the lights are.
alex's72fgmc Posted April 26, 2012 Posted April 26, 2012 no problem on the tail panel had to use up the stuff i dont need. didnt you get the floor pan to for the trunk?
420ponies Posted April 26, 2012 Posted April 26, 2012 Hi Alex, No, mine just needed piece on the drivers side replaced.Got that from Goodmark, along with a new tank strap brace.
jacob Posted April 27, 2012 Author Posted April 27, 2012 well i dont have the time or money to buy the circet board so I will have to make do wih what I have for now ... how do you get it back on ??
jacob Posted April 27, 2012 Author Posted April 27, 2012 well got it ack on and tried cranking up the car and it wouldnt even turn over and the head lights dont work eather I thought it was the battery so we boosted the battery still nothing!!!!!!!!!!!!!
Andreas Posted April 27, 2012 Posted April 27, 2012 Sounds like the headlight switch... Also make sure all your grounds are good
jacob Posted April 29, 2012 Author Posted April 29, 2012 well got it running and its back together gages dont work exept for the clock so it will do until We have some money to get it fixed.
Recommended Posts