RON T

Beautiful Car!.

Welcome and have a great experience with your rebuild, you’ll find lots of the correct info on this club site...

Yal I’ve got family up in CT. They not lookin forward to this storm.. two inches snow ⛄️ here today but it’s turning north and getting worse as it goes.. stay safe up thatta way...

Doubt a new drivers seat belt would be any longer than the original, unless it’s been modified for some reason.. I would just go to eBay or someplace like that and type in “car seatbelt extender”. Maybe come up with something temporarily.. maybe another fgmcc member knows if there are different size belts that can be ordered.. also, might could make one with the correct material...

Opgi sells them listed as an upper or lower clamp.. but I don’t know what size they are.. would probably go onto back order there as mine did.

Very nice!

I tried to buy it, but the owner wouldn’t sell, wants to fix it up some day !

Thanks Dennis, received them and installed them. Like them better than I thought I would ..with no changes or splices to the wiring on the car 👍🏻...

Thanks guys, I just stole this info from you. Tried to have 71 alignment, but they just scratched their head 🤣

Found LED conversion kit in new products for Monties forum that was started by Rob a while back. Received them today and installed. Only took 3 days to get the bulb socket 3 wire kit but 2 week to receive the conversion kit.. the 3 wire plug allowed me to install the LED kit without removing bulb sockets from the taillights.. ordered both from eBay. I have part numbers and the 3 wire color code change if anyone needs or interested.. I must say, I’m very pleased with the new brighter rapid fire taillights... B9698487-8124-4DB2-9B47-1AA63968F1D4.mov

My condolences to his family, and his his close club members. Didn’t get to meet him but we had a lot in common, Monties and the Beatles. RIP Terry.

I purchased my body mount kit from OPGI. It came with the body mount hardware, but I’m not sure which brand it really was. Ron..

Picture taken right after inner fender installation. Before remounting lift compressor.

Ordered my inner fenders thru eBay from a place called timeless performance. 2 years ago. They actually have a good shine to them being not metal.. they were not too bad to install however a couple of holes were slightly off. They haven’t cracked or anything and I would definitely recommend them. Enclosing a copy of the invoice. Not too bad a price I thought. 👍🏻

Was surfing through the fgmcc site and just found this info on led lights. Another winter project for me :). Found both the tail lights and the male 3 wire pigtails on eBay and ordered.. lights are still same listed price as when this post created. Thanks guys 👍🏻. Won’t be much longer till Carlisle !

I recommend checking with a local antique car dealer in your area ,if there are any, and ask where the best shop is for fabricating exhaust on old cars. A good exhaust man will even measure from the dual tips to the bumper to make sure it is correct and looks right.

Have not received that error or error code on iPhone or iPad. Onsite every couple days.

Nice!

WOW! A brand new 71 MC SS under the tree 🌲!. What else could a person ask for !.

Those metco box arm support thingies.

She got a new drivers door seal. Original torn 3 places. Wasn’t too difficult a project.

Super glue gel. On the back side only. Gorilla glue takes too long to set and contact glue has gas bubbles. Staples are typically too long. Watch the fingers tho. I used clamps and only did a 4-5 inch section at a time starting in middle so there would be no crimps.