joseph
-
Posts
86 -
Joined
-
Last visited
-
Days Won
2
Content Type
Profiles
Articles
Forums
Gallery
Events
Posts posted by joseph
-
-
hello, does anyone have any pictures of the clips 3919070 that hold the air line on the brake / evap. lines along the side of the car ? the the manual does not give me a good picture. any help would be appreciated. joseph.
-
what is the width of the ex. manifolds where the bolts go through ? 5/8 ?. i had mine machined and they are too thin. i am looking for a set of exhaust manifolds gm 3909879 and 3916178 mine were date coded a 26 70. i contatced leo about a used set. thanks joe
-
dan,
those clips are the ones that go by the rear air shocks from the valve to the shocks. the clips i'm looking for look look like a c.wich go from the comp. to the rear valve. thanks joe.
-
hello dan, could you give me the info for the valve assy and where to get one.the shaft seal was bad on mine. or can i get a rebuild kit wit the orings ?
i am also looking for the line clips 8 of them part #3919070 or 2340331 the same clips.
thanks joseph
-
thank you sam. you are the man .everyone in the club appreciates your help. have a great weekend. joseph
-
wich way do the top of the rear springs face drivers side or passenger side? does it matter ? thanks joseph
-
i went to a junk yard and found the bolts i needed. they had the correct rbw marks in the head.
-
hello everyone, i'm looking for 10 oem bolts for the rear differential cover or a gm part # .i have 5 i need 7 more. they are 5/16-18 x 3/4 with a washer in the head and lock tabs on the back and they have RBW marks in the head. the aftermarket ones are 1 inch long. i tried ebay and amazon the parts palace opg ground up etc.does anyone have any exta to sell ? thanks joseph
-
thank you every one. the people in this club know everything.what a great group. thanks joseph.
-
i found the 10-15 ft lbs on 2 different websites. it does not seem like a lot of torque for those bolts.
-
hello, does anyone know the torque for the 3 bolts 2 nuts which hold the dust shield,steering arm and spindle together ? it has a grade 8 bolts. the top one is larger than the bottom 2 .i found 10-15 ft lbs.that does not seem like enough torque for those large bolts. thanks joseph.
-
i went to rockauto for my air shocks. oem # 19178430. gaberial hijackers are the same as the gm 504-114. they should be painted a blue/grey color from factory.see shocks under ss454.
-
if you look at the pictures in barn find the factory shock color is the blue/grey on all 4 shocks from the factory.i m putting the spiral shocks on front and air shocks on back with the color blue/ grey as the color.
-
ok heres the color. go to gastanks.com 1-800-235-8788. they have a special blue-grey gm used on all shocks. the part # 07-03.9.50 plus shipping .1-2 cans per 4 shocks. other people have used rustoleum dark grey #1986 or krylon dove grey #1605. but there is no blue in those.
-
a powder blue or what color blue? thanks joseph.
-
great work on the ss! i'm redoing mine now. i had all chassis parts powder coated. what color were the orignal shocks front and rear ? thanks joseph
-
what color were the factory shocks front and rear on a 1970 ss. on barn find they look like a light blue ? thanks joseph
-
hello , i found the answer to my question.there are 2 types of brackets for front sway bar bushings.the most common with tabs.the other no tabs and a rounded bracket.my car is a ca. car wich has rounded bracket. i called moog at 1-248-354-7700 and they looked up my bushings. the part # is k6453 for rounded bracket. 11/8 dia. please keep for future info. thanks joseph.
-
-
-
thank you for the info. im looking at some pictures of other restored cars also.have a great week.
-
hello everyone, i'm restoring a 1970 ss.from the factory what color are the springs, shocks,frame etc. what items are plated on the chassis ? i plan on sending parts out to be powder coated this week. thanks joseph
-
hello everyone, i have a 70 ss from van nuys wich has a non cap on both ends of the bullet. the date code is 334-1.dan how do you break down the codes ? did anyone ever see a non cap bullet ? dan i would like to purchace a filter from you. thanks joe
-
dan could i purchace a filter for my load level compressor ? let me know what information you need. thanks joe
air line clips
in SS 454
Posted
yes dan, i ordered those and the clip wich goes by the splash shield.i think i have found a picture i can't blow it up. thanks joseph