tonym0828
-
Posts
53 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Articles
Forums
Gallery
Events
Posts posted by tonym0828
-
-
this site is very informational, Thanks Bruce. everyone should try to read this site before it disappears.
-
Thank you Steve
-
Hey Guys I have to keep charging my battery on my 72. So I started checking the wiring and it has an alternator and I noticed that the original voltage regulator still bolted to the cowl in front of the A/C compressor, so I checked it and there is power to it. Never ran into this before can someone tell me if I can just unplug it or do I have to rewire something.
Thanks
Tony
-
Thank you Scott
-
where at Scott
Thanks
Tony
-
Does any one know if you can buy the front inner wells separate. I just need the passenger side.
-
-
Hey guys has anyone replaced the faceplate on the heater control. I can't figure out how the knobs on the slide arms come off and do not want to break anything. All help appreciated.
-
anyone know if you can straiten one of the horizontal bars on a 72 grille The grille is in real nice condition except for that. I am wondering if a little heat might work.
-
Thanks Scott
-
will 202 heads from 66-67 fit 72 350, they code for 302, 327, and 350
-
thank you very much I figured It was probably something I never would think of. glad I did not completely put it together.
-
No I bought all sylvania 194's new and the sockets all were in the dash
-
Put new circuit board in and all new bulbs. Now some of them work and a lot do not. could the copper tabs on the sockets need bent up or am I better off buying a bunch of new ones. All help or suggestions appreciated.
Thank you
Tony Murphy
-
Thanks all, I really did no want to cut the dash or glove box. Sounds like I can keep that classic look.
Thanks to all
-
Does anyone have one of those retro sound or usa made to fit receivers and if so how well do they work and sound. saw some bad reviews but they were older and am wondering if I should go with one of them or do a glove box system.
Thanks
Tony Murphy
Regulator and alternator
in Electrical Tech
Posted
I do not have a terminal block near the battery. My positive cable runs down to the starter. so I am guessing that I would have to splice the red wire from the old regulator to the new alternator red wire. would this be correct.