[load level compressor parts]

Looking for brackets and diaphragm for a load level compressor that mounts on the drivers fender.

[Did You Ever Notice????]

good to know

[load level compressor]

Asked this question before, however finally got some extra time to hopefully find some parts for a air ride compressor on my 70 ss I,m restoring.I took my compressor to a friend that said he could try to rebuild it. he called today said he needs a diaphragm for it and cant find one ,so posting here in hopes that someone knows were to find one ,Thanks 

 

[stato buckets]

looking for any advise on seat covers ,brand quality etc, mine is a 70 ss with buckets going to need front and rear covers ,door panel replacement or repair ,headliner ,carpet. Anyone sell a kit.? thanks in advance

[Big Block driveshaft yoke for TH400 with damper/balancer]

thanks good info,I should have clarified was also wanting to verify the condition of the dampener

[Big Block driveshaft yoke for TH400 with damper/balancer]

I have one for my 70 ss ,planning on using it.Can you tell how to know weather they are good or not?

[load level air compressor]

Thanks  I'll check it out 

[Wanted auto level compressor parts]

wanted autolevell compressor rebuild parts

[load level air compressor]

a compressor that mounts on the fender tub that needs to be rebuilt

[load level air compressor]

were can one find instructions and parts for rebuilding compressor etc.?

[monte dash for sale]

not sure, how do you tell, I got with a job lot that i purchased

[True Slap floor shifter detent plates]

would like to purchase one of your plates for my 70 ss  with a 400 turbo. can I send you a check ?

[rally derby caps]

thanks for the suggestions guys. I fooled around with the best caps I had which are driver quality only. didnt turnout to bad used the spray and wipe the high spots with a gas rag

[monte dash for sale]

dash in good condition ,no cracks,has two depressions [creasese] from something on it in storage that will hopefully work them selves out.$250 plu shipping

[72 feder for sale]

72 fender, straight needs patch behind wheel,easy repair. 400.00

[rally derby caps]

Has anyone restored derby caps,I have several trying to find the best way to redo the black painted areas.I have restored some side trim for my 70 c10 by spraying the entire piece and wiping the high areas with a gas saturated rag which worked but don't think that technique would work for these. Any advice appreciated.  thanks

[12 bolt 70 monte no.s]

how do you tell what numbers mean on the rear end and tranny and if there numbers matching to the car? thanks

[New one to me....]

To bad we have to be so cautious!!

[Massive amount of NOS 1970-1972 Monte Parts]

ok thanks

[Massive amount of NOS 1970-1972 Monte Parts]

looking for ss 454 fender emblems also not rocker trim but the trim above the rockers full length and both sides

[seam sealer for trunk]

Hi I welded in a three piece trunk floor,,Ive heard of a self levelling seam sealer ,never used it,,wonder if it would be a good choice to levell out the lap seams .Any input appreciated.  thanks

[70 interior]

Anyone know of a company that offers a full interior kit ,or is it better to find a upholstery shop?  thanks in advance.

[sail panel replacement]

whats everyone useing for filler instead of lead were the sail panel meets the roof?

[hood hinges]

1. On 8/29/2023 at 6:52 PM, Stamminator said:

   I got mine from OPGI and they work perfectly.  I did, however, get original GM springs as recommended from other threads here.  And, oh by the way, getting the springs on the hinges will be an excellent opportunity to practice swearing!

    

   thanks guys for the input ,I will check these leads

[hood hinges]

weres the best place to purchase hood hinges and springs for our montes?