[Exhaust leak]

Thanks so very much for the gasket advice,,,,,they worked perfectly!!!! No more exhaust leak!!

[Exhaust leak]

Ok, awesome! Just bought them:-) I hope these do the trick, nothing else worked!

[Exhaust leak]

did you have to double up the gaskets?

[Exhaust leak]

Hey Mike,,,,,what size are your front tires? I need to get a 2in drop spindle,,,by front is way too high. I have 15in tires all the way around,,,,do you think I will need to change tire size? I hope not, they're brand new:-)

[Exhaust leak]

Will also try the high temp RTV as well:-)

[Exhaust leak]

Ok,,,we're gonna double up today! Thanks for all the help and such quick response:-) So awesome!

[Exhaust leak]

Help!!

 

I have hooker headers on my rebuilt 350. I can not stop the exhaust leak! I wont drive it with that awful sound:-( I have tried Mr. Gasket, hooker gaskets and copper! Nothing is fixing it! Any suggestions!!!!

 

Thanks so much

 

Jodi

[Front end too high]

awesome,,,thank you:-)

[Front end too high]

I have 15x8 on there now,,,

[Front end too high]

I have a set of custom 15x10 rally's that I'm thinking of putting on the rear??? Still contemplating!

[Front end too high]

That's exactly what I'm looking for:-) lmao,,,,indeed a boat!!! Can't wait to do this! Thanks so very much:-)

[Front end too high]

Definitely going with your setup Michael:-) Thanks so much!!

[Front end too high]

Oh how I would love to drop a big block it that! That was funny:) Thank you everyone for the info!!!

 

I'm thinking the drop spindle kit sounds like the way to go! Thank you so very much guys:-) Do I need to be a club member to post pics?? I don't see where I can if I don't pay the dues,,,which is no biggie just curious:-)

 

 

Thanks a bunch!!

[Rear End]

I have no idea??? I'm still looking for a rear end for this car? It's not easy finding things for Monte's im finding out:-(

[Front end too high]

Help, help!!

 

What is the best way to lower my front end of my 70 Monte? I replaced the shocks, air in the back all the way up. I hate the lift I have in the front. I want a nice slight raise in the back. Any ideas? Went to the Good Guys show yesterday in Kissimmee and spoke with the Ride-Tec guys, and their products will cost about 1500 to do it:-(

 

Any ideas will be greatly appreciated:-)

 

Thanks guys!

[Rear End]

Thanks so much for the info guys! It really helped! Now to locate one!! Goin to Turkey Rod next month, hopefully I'll get lucky!!

[Rear End]

Whats the difference in the 341 and 342?

[Rear End]

It's a 12 bolt,,,thanks so much for the quick reply:-)

[Rear End]

Here's a question!!!

 

I did a rebuild on my 70's 350 motor. The car came stock with a 273 rear end which is awful! I was told that a 4:10 would top out at 65 and wouldn't do well in my car. The engine builder says to use a 342, says it would be the best of the 2. Get up and go, and good for cruise down the interstate. Please let me know what your take is on this, I'm ready to finally drive my girl, but want to make sure I can burn a tire, and still drive it to Turkey Rod run in Daytona where I originally bought her last year:-)

 

Thanks soooo very much for any input! Let me know what you think:-)

[Door Panels]

Thanks for the site:-) Have a super weekend!

[Door Panels]

Anyone have some good spots for new inner door panels for my 70 Monte:-) Thanks for your help!

[Cowl Hood]

Great,,,my 70 has the painted gap in between. Can you please message me with a price on the trim you have:-)

 

Thanks so very much!!

[Cowl Hood]

Sweet,,,,Ok,,,so school me on the difference between full halo and normal:-) This is my first car build and I'm learning:-)LOL

[Cowl Hood]

Thanks all for the great help!! Does anyone know if 70-72 Chevelle vinyl top moldings will fit the Monte? I'm redoing my top to black and those moldings seem to a needle in a haystack,,,but found some for the chevelle!

 

Thanks once again!

[Cowl Hood]

Hey all,,,,anyone have a clue where I can find a steel 2in cowl hood for my 70 MC???

 

Any help will be greatly appreciated!!!