-
Posts
17 -
Joined
-
Last visited
Never
Content Type
Profiles
Articles
Forums
Gallery
Events
Posts posted by true blue
-
-
Pictures please with the trunk lid open......
Thanks
TB
-
Hey Leo got the parts now paint and install.
Thanks Again, Great Service As Usual !
Bill
-
Can someone take a pic and post showing the trunk open so
i can see the Black area.
Thanks
TB
-
What Color Black is that between the chrome ?
Thanks
TB
-
Carl
I don't see the end 4 pieces on the "Trim Part" site ?
TB
-
Can someone tell me if the top and bottom chrome pieces are
the same. I found the 3 piece bottom at The Parts Place but
they don't sell the top 3 piece and looking at the picture it looks the same so why not buy two sets ??? I have the Monte
Carlo and SS emblems.
Thanks
Bill
-
It"s a lock up as far as i know. When i reach 45 MPH it shifts into O/D and if i pull back into 3 it jumps the RPM
back up again and another thing i notice is no matter
how fast im going 70 - 80 MPH when i punch it it jumps back
into 3 and when i let off a little it jumps back into O/D.
One more question what is the stock rear end size for a
71 is it 8.2 or 8.5 ?
Thanks
Bill
-
Mr70Monte
Can you explain how you came up with those numbers???
because i have the first setup and according to my tach
i'm showing 21-2200 and was thinking of going with the 3:90
setup but did'nt want to lose the gains i just got with the 700r4 O/D tranny.
Thanks
Bill
-
Can someone tell me what RPM i will be at speed 60 MPH
700R4 Tranny with 3:36 gears and 245 60 R15 Tires = ______ RPM
700R4 Tranny with 3:90 gears and 245 60 R15 Tires = ______ RPM
Thanks
Bill
-
Just wondering if these will fit or if someone can recomend
the best fit, ceramic coated or stainless that will hold up good. 454 BB of course.
Thanks TB
-
I just noticed a new noise from what i think is my Rear End ??
it's only noticable when your are going slow and make a turn at
a stop sign.... (What i have is a stock 10 bolt rear converted to a possi with 3.36 Auburn and about 2000 miles since install) I've checked the fluid level and all is ok. its
a grey color now but was originaly a purple i think it was call
Castrol Royal Purple Syntethic. It's only on the turn that it makes this noise and what it sounds like is a Electric Brake
on a Trailer grabbing any ideas ? should i change the oil ?
Maybe i'm parenoid but i don't seem to get the inside wheel drag on a turn like it use to do when new but maybe thats just my mind playing games because it still locks up when you burn
the tires ???
Thanks in advance.....
TB
-
I just noticed a new noise from what i think is my Rear End ??
it's only noticable when your are going slow and make a turn at
a stop sign.... (What i have is a stock 10 bolt rear converted to a possi with 3.36 Auburn and about 2000 miles since install) I've checked the fluid level and all is ok. its
a grey color now but was originaly a purple i think it was call
Castrol Royal Purple Syntethic. It's only on the turn that it makes this noise and what it sounds like is a Electric Brake
on a Trailer grabbing any ideas ? should i change the oil ?
Maybe i'm parenoid but i don't seem to get the inside wheel drag on a turn like it use to do when new but maybe thats just my mind playing games because it still locks up when you burn
the tires ???
Thanks in advance.....
TB
-
Hav'nt figured it out yet, will take out the
plastic gear tomorrow and count the teeth and
note the color.
Thanks TrueBlue
-
Just changed from a 2.73 to a 3.36 gears and
my speedo is out of wack. What do i need to
get it back in sync again. Its a 350 Turbo
tranny.
Thanks TrueBlue
-
I have a B&M shift kit in my TH350 and
no problems thus far,it do shift hard
and will chirp the tires.
True Blue
-
I 99% sure that they are 1/2"
I just bought new lines and am planning
on re-doing mine over the winter.
True Blue
700R4 - 3000 Stall Converter
in Drivetrain Tech
Posted
Here's the deal i was sucked in to buying a 3000 stall( $800 CDN)for my 700R4 rebuild and after install ( 25 miles) i did not like the stall so i went back to the shop and asked if they would trade it in for a stock and no such luck. Once it was installed i was stuck with it so now i have it for sale.
Best price i can get for it.
Here's a link to the unit http://www.compperformancegroupstores.co...uct_Code=242963
Thanks
TB