Jump to content

jim's 70

(Non-dues paying)
  • Posts

    214
  • Joined

  • Last visited

  • Days Won

    3

Posts posted by jim's 70

  1. I have used several of the lucas products and found they ae the only additives that do anything. I put the trans additive in my dodge p-up and the shifts firmed up noticably. I ran it for 20k then sold the truck so I don't know if there was any long term problems,

    Jim

  2. If all of the bulbs are good, try a new flasher. There should be 2 of them, 1 for the hazards and one for the signals. i have seen them go bad and only one side dosen't work. Does not make sense to me but it has been known to happen.

    Jim

     

    ------------------

    1b1.jpg

  3. I've run into a problem on newer gm's with fuseible link wires at the starter. I don't know how familiar you are with these, but they can be decieving. When they go bad the wire will break inside the insulation. They should burn the outside also so you can see it , but they don't always. are you checking power with a test light or a voltmeter? A test light dosen't always give the best result, it may light with as little as 6 volts which will not run the car. Just my lil input, hope it helps.

    jim

×
×
  • Create New...