Jump to content

lastss

(Non-dues paying)
  • Posts

    337
  • Joined

  • Last visited

  • Days Won

    11

Posts posted by lastss

  1. FYI, That's not correct, It's suppose to be 3/8 line from carb, then 3/8 line from Tee to pcv vavle then 1/4 line to air shock pump. Picture in assembly manual & I have nos tee part# Thanks Bob

  2. Make sure you get paint for plastic, like Kyrlon has to be free of all wax etc or you will get spot were it doesn't stick/small bubbles. clean with strong thinner. warm up can first with hot water & mist it on with light coats. should come out nice. Take your time. Later Bob

  3. Hi, It's was done correct in all aspect/ date code lof/tint etc they have 1 place in Ohio, 1 in Calf it was $350, Shipping with a great custom made box, I had it shipped to a company address saved $50 shipping.

  4. A spring in the garage door broke, Never hit the body or paint Lucky there. It had a cable through it but the contractor cable had too much slack in it allowing it to hit the glass but nothing else.. I did it myself this time so it will hold it in place away from car if it ever happens again. Very tight heavy cable.. Later Bob

  5. My son owns these & was going to clone an ss he change his mind. Yes he wanted $400 & $350 min from a club member. Now he has lowwered it to $250 same as reserve, if you commit to buy before it bids to reserve on ebay. The buy it now for $400 is for outsiders. Hope this clears up any confusion. Later Bob

×
×
  • Create New...