joseph

yes dan, i ordered those and the clip wich goes by the splash shield.i think i have found a picture i can't blow it up. thanks joseph

hello, does anyone have any pictures of the clips 3919070 that hold the air line on the brake / evap. lines along the side of the car ? the the manual does not give me a good picture. any help would be appreciated. joseph.

what is the width of the ex. manifolds where the bolts go through ? 5/8 ?. i had mine machined and they are too thin. i am looking for a set of exhaust manifolds gm 3909879 and 3916178 mine were date coded a 26 70. i contatced leo about a used set. thanks joe

dan, those clips are the ones that go by the rear air shocks from the valve to the shocks. the clips i'm looking for look look like a c.wich go from the comp. to the rear valve. thanks joe.

hello dan, could you give me the info for the valve assy and where to get one.the shaft seal was bad on mine. or can i get a rebuild kit wit the orings ? i am also looking for the line clips 8 of them part #3919070 or 2340331 the same clips. thanks joseph

thank you sam. you are the man .everyone in the club appreciates your help. have a great weekend. joseph

wich way do the top of the rear springs face drivers side or passenger side? does it matter ? thanks joseph

i went to a junk yard and found the bolts i needed. they had the correct rbw marks in the head.

hello everyone, i'm looking for 10 oem bolts for the rear differential cover or a gm part # .i have 5 i need 7 more. they are 5/16-18 x 3/4 with a washer in the head and lock tabs on the back and they have RBW marks in the head. the aftermarket ones are 1 inch long. i tried ebay and amazon the parts palace opg ground up etc.does anyone have any exta to sell ? thanks joseph

thank you every one. the people in this club know everything.what a great group. thanks joseph.

i found the 10-15 ft lbs on 2 different websites. it does not seem like a lot of torque for those bolts.

hello, does anyone know the torque for the 3 bolts 2 nuts which hold the dust shield,steering arm and spindle together ? it has a grade 8 bolts. the top one is larger than the bottom 2 .i found 10-15 ft lbs.that does not seem like enough torque for those large bolts. thanks joseph.

i went to rockauto for my air shocks. oem # 19178430. gaberial hijackers are the same as the gm 504-114. they should be painted a blue/grey color from factory.see shocks under ss454.

if you look at the pictures in barn find the factory shock color is the blue/grey on all 4 shocks from the factory.i m putting the spiral shocks on front and air shocks on back with the color blue/ grey as the color.

ok heres the color. go to gastanks.com 1-800-235-8788. they have a special blue-grey gm used on all shocks. the part # 07-03.9.50 plus shipping .1-2 cans per 4 shocks. other people have used rustoleum dark grey #1986 or krylon dove grey #1605. but there is no blue in those.

a powder blue or what color blue? thanks joseph.

great work on the ss! i'm redoing mine now. i had all chassis parts powder coated. what color were the orignal shocks front and rear ? thanks joseph

what color were the factory shocks front and rear on a 1970 ss. on barn find they look like a light blue ? thanks joseph

hello , i found the answer to my question.there are 2 types of brackets for front sway bar bushings.the most common with tabs.the other no tabs and a rounded bracket.my car is a ca. car wich has rounded bracket. i called moog at 1-248-354-7700 and they looked up my bushings. the part # is k6453 for rounded bracket. 11/8 dia. please keep for future info. thanks joseph.

thank you for the help. the oem ones on my car are 45years old.i have not been able to match them up anywhere. i will try leo. he has helped all of us at some point. thanks joseph

hello everyone, im looking for a pair of oem front sway bar bushings for my 1970 ss.has anyone been able to find some of these ?

thank you for the info. im looking at some pictures of other restored cars also.have a great week.

hello everyone, i'm restoring a 1970 ss.from the factory what color are the springs, shocks,frame etc. what items are plated on the chassis ? i plan on sending parts out to be powder coated this week. thanks joseph

hello everyone, i have a 70 ss from van nuys wich has a non cap on both ends of the bullet. the date code is 334-1.dan how do you break down the codes ? did anyone ever see a non cap bullet ? dan i would like to purchace a filter from you. thanks joe

dan could i purchace a filter for my load level compressor ? let me know what information you need. thanks joe