[Painless wiring]

i am to be corrected but there is a supplier called m and h that has specific monte harness due to  the longer nose base........or h and m

[Boxing the Frame to stiffen it?]

if you are brave enough to get that far do it yourself....make the cardboard templates and cut 1/8 plate or take to welding place and have them cut it out

[The English Language Ain't Easy]

very cool...however we have colours you have colors...work labour vs labor..yet our favourite is the same

[71 MC. Just purchased. Have Questions.]

how come nobody jumped on the 1970  front bumper

[Tail Panel Repair]

wow is that what concrete looks like in a garage..lol..nice work

[Best Trunk Floor]

used a one piece...took lots of time and effort and an international trip to leos to get the piece i needed

[wheel well depth &]

thank you blackhawk

[wheel well depth &]

how we doin?

[wheel well depth &]

hey guys its been awhile...getting back to my project now...can i get a depth measurement from inside lip of rear 1/4 to inner fender well?..2 measurement of inner fenderwell to frame pls as i a am back halfing the frame and have lost all my measurements through my move/divorce...And yes she let me have my "piece of crap car"

i will be narrowing the axle and already have tires/rims

regards...bill

[71 SS 454 MUST BE CRAZY]

stock up on bourbon and aspirin my friend...wow

[Halo top]

if you want the halo... purchase the trim and place it on the car in a ghost position  and mark where it is on the car.... then you will know where the studs can go

[Keith's 70 Monte build]

you will need to separate frame and body for a full 1 piece

[Steel inner fenders.....what brand?]

you will be bent over with border fees and shipping charges..i would try an auto body shop and order through them..or a napa

[What would you bid for a 1970 LS6]

doesn't blue print sell long block WITH a really good warranty ????...better money spent that way.imho .....rather than HE will get it checked out

[What to do on floors and back seat tray ?]

some just epoxy primer...some put lizard skin as a heat and sound barrier..some put down fat mat or some other same type of product....me ?....I will be epoxy primer followed by some (fat mat)roofing patch product...which is a sticky stuff with aluminum backing ...then a mass backing under the carpet....I will be doing almost all of the interior like this...por15 is way too expensive up here

[My super cheap seat upgrade!]

well now....2 nice seats .....for 75.00.....in canada ??????..seller must have been drunk...thats like 50 american bucks...lol

[Tail light housing gasket?]

i saw a 66 chevelle with these last year.......hmmmmm..interested

[Height of 72 MC]

others may have the same springs and can offer some measurements...sooo let us know what they are and the # ratings

[Height of 72 MC]

from my understanding here it will take a bit for your `new` springs to relax and settle to their new ride height

[Trans line connection at radiator]

I never could understand sending hot oil to a hot rad...I always thought the better cooling way would be a small external mounted trans cooler rad up front

[Plastic inner fenders for my 71]

why not get them plastic welded back together

[trunk aluminum trim]

thanks guys...I do like the look, and my rear panel from leo is less than straight, so it will cover up the panel waves..lol...cool is coming in the form of a back half job ...got the trunk  cut out and am working chevelle outer wheelhouses into monte ones..presently saving up for axle housing narrow and posi and new axles and disk set-up...Murph I still have the old tail panel that i can use as a model, thanks anyway

[trunk aluminum trim]

I assume your refering to the trim from a 72? The 3 peice wide trim just below the trunk? I have seen this added to 70s and 71s before just because someone like it. 72 was the only year that came on from factory.

I thought so...ys the wide trim

[trunk aluminum trim]

Soo Aaron it looks like someone added this to my 70? was this a "thing" that people did to these cars ??? I have had to cut out the entire rear panel/body support due to rot..so my new piece that I got from Leo does not have the holes drilled for the rear trim...I do like this trim and would like to add it but is this a big thing ? I don't care what other "regular "people think cause its MY car..but what would other monte owners think ?

[trunk aluminum trim]

hello all..looking to get back into working on the car again, a question came to me...my car is a 1970  Flint born unit that "came" with the 3 piece rear trunk trim when I bought it. My understanding from past posts is that this trim did NOT come on 70's. There was no indication that there was any damage/accident that the rear may have been cut off and resewn back together...is this something that was added in its prior life ?...any thoughts?...thanks Bill