-
Posts
540 -
Joined
-
Last visited
-
Days Won
5
Content Type
Profiles
Articles
Forums
Gallery
Events
Posts posted by 1Bad454
-
-
Also if I am able to salvage a few pieces what is the easiest way to clean them up and polish them to like new condition? Just a good metal cleaner?
-
9 hours ago, Dtret said:
Which molding’s are you looking for? All the lowers I got from the parts place. A little thinner then original but I think they look really good.
When I bought the car it had a pile of metal moldings in the trunk. So I don't know what they are or for. I went through everything yesterday and couldn't figure them out besides the obvious lower side moldings and windshield moldings that I removed myself. Some of them look strange so I don't think that they are for a Monte Carlo. I'm not sure what the vinyl top moldings look like. That's one thing I was trying to figure out to see if I have them.
-
Hey Dennis what's the latest?
-
I went through my pile of metal strip moldings and most of them are not in the best of condition. Since my car is a complete restoration I am looking at purchasing all new moldings. I see that OPG pretty much has it all but was wondering if there are any other companies that make good quality moldings?
-
Hey guys what are your opinions on aftermarket door latches? Should I just stick with a good used factory set?
-
-
11 hours ago, Leghome said:
I bought new hinges and springs from Leo Konicks Klassiks and the work perfectly he is listed in our venders section.
I just spoke with and will be buying some factory hinges and springs from them. Thank you sir!
-
1 hour ago, Dtret said:
That’s the best way to do it. It’s way more labor intensive but they can fix and issues on the body before paint. Make sure you ,and them, line up the body with the alignment holes so it’s on there straight. Honestly it sounds like a good shop that knows what they are doing. That’s going to hurt the wallet. Lol. You haven’t posted pictures in months. Time to get us caught up don’t you think?
Thanks for the affirmation Dennis! I thought that they were just trying to over charge me. My progress has been baby steps since I've been waiting for a year to get it into paint. I've been posting videos on my YouTube channel. I'll get a few a pics posted later today or this evening.
- 2
-
4 hours ago, Dtret said:
Do you have the body on a rotisserie? It needs to be somewhat movable for them. Mine was on a rotisserie so it wasn’t a problem. Make sure they tape and paper off the frame and engine for overspray. At least if it’s on the frame and bolted down you won’t risk scratching anything during assembly
They told me to put the body back on the car. When they get it in the shop they told me that they will get the body lines all straightened out. Next they will pull the body back off the frame, disassemble, media blast and paint. Kind of strange but that's what they want to do.
-
39 minutes ago, Dtret said:
Ron, you’re in Cali. Get on Facebook or Craigslist they are probably all over. I believe a couple of guys live out your way that are members. Check the resource section. Joe Vega (?) comes to mind. Playing with the hood, you must be getting close. 👍
I forgot about Joe! I just emailed him. I'm getting ready to take it in for paint. They want me to put the body back on the car though... It doesn't make sense but that's what they want.
-
Yeah my issue is that I don't have any. My car came with the hood laying on the car..
-
I'm looking for a good quality set of hood hinges and springs. Also does anybody sell the hinges with the springs installed?
-
-
-
Dennis I think that you may need some new valves..
-
1 hour ago, Rob Peters said:
Ditto
rob
The last I spoke with him a year ago or so he told me that he was having trouble sourcing the parts. I messaged him the other day and haven't heard back. I guess I could try giving him a call.
-
-
I have used poly before without an issue. However that may be due to the fact that I try to avoid driving in the rain and it doesn't rain very much where I live. The key is to use the grease supplied liberally. Buy extra if possible. I use Energy Suspension poly bushings.
- 1
-
Not sure if this has been posted before but there is a company who still manufactures A6 compressors. I spoke with them a few weeks ago. The company is called Alma. They told me that they purchased the original tooling from GM and are still making them. They do not sell direct but they gave me some info on one of their distributers. I'm not sure if they sell direct either but they can probably locate a shop that sells them. https://www.globalpartsdist.com
- 1
-
Looking good! 😎
- 1
-
On 5/13/2022 at 4:36 AM, willie said:
I haven't seen one of those babies in years!! And she looks to be in great shape, considering!! Nice find Ron!!
Thank you Willie! I wasn't looking to purchase another car but when I saw this I couldn't pass it up!
- 1
-
There are three cars the mezmorized me as a 70's kid. 1970 GTO, 71-74 Javelin and 70-72 Monte Carlo. I've now got two of my dream cars.
- 3
-
-
Thank you sir! I took mine apart two years ago and can't find my linkage. I ended up buying some factory replica parts and am trying to figure out how it all comes together. Does that rod that comes off of the gear selector just stub into the bracket on the frame?
Topic suggestion
in General 70-72 Monte Carlo Forum
Posted
What are your thoughts?