-
Posts
222 -
Joined
-
Last visited
-
Days Won
9
Content Type
Profiles
Articles
Forums
Gallery
Events
Posts posted by imr
-
-
12 minutes ago, DragCat said:
Hey Antoine, looks like we are breathing a little easier today with the tracking updates. Thoughts and prayers for everyone else up the coast or wherever Mother Nature decides to spew her wrath. Ive got 80% of my shutters up, I'll do the rest tomorrow just in case. Oh and Antoine, I saw the Stones in San Diego on their FIRST this is our last tourĀ š²
wait i had just told my daughter this could be their last tour and i said it would have been great if they had someone comeup who was at the very first one. that could have been you.Ā
eishing everyone well. it does look like we might have had a test run on hurricane preparednessĀ
-
-
-
-
can you show a pic when it is assembled. trying to get an idea
-
-
hilarious
-
flush the system remove all oil. i use Alcohol but you can find other products to use. Rob also had a pretty good write up on rebuilding his system and i believe he went r134 also.
- 1
-
short answer is no. i believe you need to replace the expansion valve and poa
- 1
-
2 hours ago, LostnFound said:
For a list of gas stations serving non ethanol go to www.puregas.org
i tried that website and it does not come up
-
oh you have one of those. that definitely makes sense. let us know.
-
odd to have no spark in 1 cylinder. recheck cap, rotor wires. make sure the tang in the cap drops in the notch of the distributor. the ones that have spark what color is the spark?
-
do you have spark in the other 7 cylinders? how much play do you have in the distributor shaft?
-
glad you pulled through. a blessing and a blessing to have you in this group
-
i believe they are forward of the read wheels in the frame. i dont have a monte here to look at. the trailing arm on the right looks like it hit something but i have not spent enough time to tell you if its bent.
-
I believe on Montes you have 4 holes. its not a perfect system. make sure you guid rod goes in straight not on an angle.
-
it has been a while but i recall onnsome cars they had a hole on the frame and one on the body, you could stick a 1/2 or 3/4 bar in there to align body on frame.
-
you can get it with ospho because it is very liquid then try some por15. maybe someone else has a better idea but that is what i would try
-
they at best had over spray from the factory. you could spray and readjust and spray again
-
I am no expert and I am just sparking conversation.Ā
From what i remember we have Poly and Ethinyl glycol and I will just call them antifreeze. i believe fresh clean fluid is not very bad for the environment due to the short half life, but its toxicity when consumed is very high and add that it is sweet tasting makes it appealing to animals. so when we say a friendly product is the concern primarily the environment or our pets. I personally do not believe it is a product that is harmful to the environmentĀ if clean, once used then it does become an enviromental issue. part of is job is to sacrifice itself for the longevity of our cooling system, with that it absorbs zinc,chromate, iron, copper and many more.Ā
-
i would guess your bendix is being driven but you have a dead spot on the armature. i dont know about the mini starters but the delcos if i remeber correctly you have a disk in the solenoid you can clean or reverse. 2 brushes that wear and the commutator that you can clean with emery or a lathe. take it apart and see.
-
we can now call you MC2or80š¤£
-
looking good take advantage of the weather while you have it.Ā
-
Dennis your car is gorgeous and it has had a great 8 years. hopefully it will grace some of the events and you can reconnect.
- 1
Dorian...
in Non-Tech
Posted
wait i had just told my daughter this could be their last tour and i said it would have been great if they had someone comeup who was at the very first one. that could have been you.Ā
eishing everyone well. it does look like we might have had a test run on hurricane preparednessĀ