Regmon

So Are you saying that if I do cut into the trunk pan it would expose the caged nut???

hello everyone. I am in the process of replacing the body mount bushing on my 1972 Monte. I have a bolt that just keep spinning in its cage. it's the one behind the rear wheel (2nd from the rear bushing by the bumper going to the front)) my questions is if i cut a hole in the thunk pan will it expose the caged nut to where i can remove the bolt & replace the rubber body bushing? any info on this would be greatly appreciated & pics are always welcome.... thanks everyone.

Thanks for the response. I'm going to look into both of them.

Good day everyone. Any body have source for body moulding clips like these? They are for the lower moulding on my 72 monte. The green clip is from the front fender rear lower moulding. The black plastic clip is from the quarter panel front moulding..any info will help. Thanks...

thanks for the link!

Where would find this?

Hello everyone hope all is well. I am looking to refinish the grille on my 72 Monte. I was wondering if anyone has done this before. I would like to keep it stock looking, so if anyone has done this and has any good tips for refinishing or pics of the finished project i would very much like to see them. thanks in advance to any advise or pics you care to post.

Thanks everyone. This info helps out very much..

Hello, I'm looking at replacing my cracked 72 inner fender wells. My question is, has anyone done this without removing the fenders? If so what was your experience like?. Thanks for any help.

Nope, no power.

Hello, just wanted to show some pics of the finished project. Thanks to everyone who gave there input.

Sounds like a good idea. I know they will get quite hot.

Great guys, worked perfectly!! Thanks for the speedy response.

Help, installing the floor console, where do I pick up the wire for the courtesty light on the rear of the console, and what color would it be?? Thanks for helping.

Great!! Thanks for the insight..

So if I use what was originally with the column shift, via the column shift linkage. I will not need the ns switch,reverse lights seitch that's on the floor shifter assembly? The only wiring would be just the courtesy light & shifter ID lights?

Hello. Another console shifter question. I'm doing a column shift to floor shift conversion, when hooking up the floor shift cable to the tranny shift lever. do I still keep the linkage hooked up for the column linkage? If so for what reason. Thanks for any input.

thanks everybody...rebuilt everything. see pics of what i started with...

hello...does someone have any pics of how the floor console is installed on a 72 monte, mine has a bracket missing from the unit i'm installing. and what size the bolts are that hold it to the sifter & floor? thanks..

yes, did all the work myself...

seats & console all done. buttons set at 11 1/2" from top. thanks Dan

looking at my bench seat, it looks like the buttons are at the same height as the buttons on the door panels. maybe i'm splitting hairs..but thanks for the measurements..will help when ready to put the buttons on the covers.

Hello everyone. I have bucket seat question. I'm doing a bench to bucket seat conversion on my 72 monte. and I'm recovering a set of seats from a 71 Malibu. My question is, what is the distance the buttons are from the top of the seat backs? Are they placed half way from the top to the bottom? Of somebody can measure there seat button location, that would be great. See pic..any info is appreciated.