Jump to content

G71

(Non-dues paying)
 View Profile  See their activity

  • Posts

    28

  • Joined

  • Last visited

 Content Type 

Posts posted by G71

    Front Inner Fenders 1970 MC

    in General 70-72 Monte Carlo Forum

    Posted

    Was about to create a post then saw this.

    I noticed on my 71 the inner fender wells are plastic, did these first generations come with plastic or metal As original? 
    There is also a post on this topic from 2012/2013, many of the guys also expressed a full spectrum of mixed experiences in terms of how well the aftermarket holes line up.

    additionally I also ordered the complete gasket kit from OPG with the splash guards that attach to the inner fenders, these are rubber. I find this a bit concerning since they are so close to the manifold, I worry they might burn?
    any experience or opinion on this?

    Just finishing up a repaint, The plastic inner fenders look fine from the engine compartment but when you look at the underside of the wheel well they look kind of ratty, don’t know if I should bother replacing Which is why I ask?

    thanks

    white repaint - color comparison charts

    in Auto Body Repair

    Posted

    hey guys

    my 71 will be repainted white without vinyl.

    im guessing i can see the original white paint color code here in "resources" but are there any good color comparison charts out there someplace, where you can compare virtual swatches side by side?

    i don't necessarily need to keep it the original color, looking for a simple appealing brighter traditional white (arctic/polar etc) and not any type of "off white"

    looking to keep it simple and not complex (no pearl or specialized tones etc)

     

    thanks

    trim mldg clips

    in Auto Body Repair

    Posted

    thanks guys

    i am using the opg catalog for reference, so just to clarify....

    i see the "rocker molding clip retainers 22pc kit " $60

    and

    "body side molding clips 70-72 lower"  $75 for the set

    am i correct in understanding that even the sets dont include the clips for the tail panel trim/rear trim (the bottom rear trim piece with the marker light between the back of the rear wheel and the rear bumper?)

     

     

    trim mldg clips

    in Auto Body Repair

    Posted

    was looking for the clips myself as i am doing a repaint

    did you end up finding something suitable?

    whats the likelihood that some of the original clips can be reused?

    i see the clip kits are rather expensive

     

    instrument cluster upgrades

    in Electrical Tech

    Posted

    my 71 (non SS) has the standard dash cluster

    im not concerned about its originality and was thinking of simple modifications to spruce up the cluster.

    for starters i was wondering if there is an upgrade modern type clock that could be inserted into the existing clock opening.

    any ideas please let me know.

    thanks

    side view mirror question

    in General 70-72 Monte Carlo Forum

    Posted

    my 71 has the original remote drivers mirror which has the thicker bezel , but does not have a passenger mirror.

    its in for a repaint so now is the time to address..

    i see the parts place has a passenger side view to match the original drivers remote, other than that all the new pair kits seem to be the thin manual type (including morris which was mentioned)

    trying to decide if i should just get the new thinner/manual all around or try the passenger side "match"

    has anyone used the remote passenger match? if so does it exactly match the drivers side?

    also do the gaskets sold by the vendors match the footprint of the original drivers?

    im not concerned about originality.

    thanks for any advice.

     

    weatherstrip for windows and doors

    in Interior Tech

    Posted

    i am looking to purchase new weatherstrip for my 71 (all doors, windows, trunk etc)

    i tried the parts place as others have recommended but their on line catalog leaves a lot to be desired.

    has anyone had luck with any one particular vendor or brand for this item?

     

    i will be holding off on replacement for the doors and trunk until after paint but i need the quarter window vertical asap

     

    thanks

    recommended parts resources

    in General Tech

    Posted

    hello

    getting back into my 71 after haitus

     

    whats the best place to buy specific parts for our first generation montes

    (parts other than the generic items we can get at any auto store)

    i have an old original parts group catalog, is this one of the main go-to places or are there others to consider.

     

    at the moment i am looking for the rubber that goes around the rear windows and possibly a new headliner and carpet.

     

    thanks

     

     

    Erratic fuel sending unit

    in Electrical Tech

    Posted

    In the process of reviving my 71 350

    The fuel sending unit is erratic, I know the tank is near empty but sometimes the gauge pins past full.

    Is this indicative of a gauge or sender issue?

    I am considering replacing the tank anyway as its been near empty and has been sitting for years

     

    Thanks

    Carb rebuild advice

    in Engine Tech

    Posted

    1971 350 2bbl

     

    After many years of other priorities my objective is to get my 71 up and reliably running.

    Overall it's a pretty solid vehicle (Arizona car) but has seen very, very limited use over the last 8 years, being started maybe once every year on average. Of course i will be going through the entire car, tuneup, lines hoses etc.

     

    I have started the car several times lately and the motor "appears" to be running ok.

    I realize stale sitting fuel is not a good thing, So i know i am starting with a reliable base, My questions are...

     

    1) should i have the carb rebuilt

    2) should i change the gas tank

     

    Fuel stabilizer was not used very much and the tank was only half to quarter full this whole time.

     

    Thanks for the opinions

    stance modification - wheele/tire/spring ideas

    in Brakes and Suspension Tech

    Posted

    hello all

     

    i know this type of question has been addressed many times before and can be found somewhere on the forums but as individual taste varies widely a need a basic idea and starting point for my "particular" objective

     

    vehicle....

    stock 71 350ci with AC

     

    objective....

    to slightly raise the vehicle evenly all the way around for a "beefier but modest raised stance" using either 4 original 15X7 "FW" rally rims OR 4 original 15x8 corvette "AZ" rallys.

    with the same size tires all around

     

    i wish to avoid cutting or trimming the wheel wells or using air bags or air shocks.

     

    what type of spring/brand would be best suited for this and what size tire on which rim do you think would give the best look.

     

    thanks in advance for the advice

    battery choice - proper size

    in Electrical Tech

    Posted

    1971 350

    i just went to wallmart and entered the information for choosing the proper battery, it showed two sizes one being slightly larger than the other. will the larger one fit?

     

    my battery has the "side post" mounts (flat discs)

    i was just curious if this standard on our cars or if someone modified it in the past

     

    i usually choose my batteries based on consumer reports recommendations

     

    thank you

×
×
  • Create New...