-
Posts
130 -
Joined
-
Last visited
Content Type
Profiles
Articles
Forums
Gallery
Events
Everything posted by sendo
-
what materiel is the tail light housing made of? thanks, Sendo
-
how are these fasten to the car, screws or plastic plug? https://www.ebay.com/itm/1970-72-Chevrolet-Monte-Carlo-Rear-Bumper-to-Side-Seals-Pair/352772481719?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m2749.l2649
-
are you happy with them, how many watts are you running to them and how is the sound?
-
just bought a stereo dash pad and want to add some speaker, what is the best size and brand will fit in there? thanks, Sendo
-
my rear bumper is pushed in on the driver side, I took off the bumper and can't tell what is bent how are you guys fixing this?
-
sorry for posting on a 4yr old post, but is my vac hoses crossed? should I connect the dis hose to the port with the plug in front? thanks, Sendo
-
So what parts make it different?
-
No not the original, came out of a 68
-
so I supposed to have CS
-
hello, so my 70 monte ss has a th400 that has a tag with CD and believe I am supposed to have CR. my question what makes them different?
-
Hello, does anyone have a pic of how the power window harness is routed in the door? thanks Sendo
-
hello, trying to put the a/c hose on and notice i have very little room between the a/c compressor and the level ride compressor. looking at some pics and see some with the front bracket backwards compared to mines, is mines right or wrong? I don't understand the print with all the lines labeled 25sv,-15 pv,25pv and so on. does anyone have a pic on where I need to mount my compressor? thanks, Sendo
-
hello, where is the correct placement of this valve on a 70ss? I googled pictures and seen it mounted all different kind of way, up high on the fender, down low under the a/c line, vacuum part facing back to the firewall, vacuum facing front to radiator
-
another unsuccessful day, went to Napa, o'reilly's, autozone, carquest and Clutch & Brake Xchange
-
went to lowes and home depot and could not find anything. what kind of fitting are these? lowes only had compression fitting and reg pipe. are these iff?
-
so I found these fittings on ebay for the air lines, but need the ones that go in between them and the valve, looking a pictures think I need a T on top and single on bottom and what about the exhaust? anyone know the sizes or a part number? thanks Sendo
-
think I found it, missing this tab on the switch on my old unit so its grounding out it the off position. will install this rebuilt one this weekend and see if it goes away.
-
yes its the off switch, buying a recondition unit hopefully it will fix it
-
hello, staring to put this car back together and connected the battery and my fan was on when I turned it off it blew the fuse(a/c tsc sol) put in another fuse and it blew a soon as I turned on the ignition. If I turn the fan on before replacing the fuse it works in all speeds, but as soon as I switch to off the fuse blows, anyone have a clue? thanks, Sendo
-
this is what I have, guess there is a difference with having a/c https://www.ebay.com/i/254181594636?chn=ps&norover=1&mkevt=1&mkrid=711-117182-37290-0&mkcid=2&itemid=254181594636&targetid=858513787104&device=c&mktype=pla&googleloc=9032210&poi=&campaignid=6470636538&mkgroupid=81597521470&rlsatarget=aud-622524041038:pla-858513787104&abcId=1140476&merchantid=7978624&gclid=Cj0KCQiAvJXxBRCeARIsAMSkApoWBY9JJGIc36j_GtE_Ai8SWMxlDnIGOMsQKrlGKbTBkhg2wFOeTQ4aAiM2EALw_wcB https://www.heartbeatcitycamaro.com/store/product/20884/1969-Camaro-Chevelle-Nova-SB-%26-BB-Water-Pump-Pulley-GM%23-3932402/
-
don't have time to take it off till next week, but just measuring from the top of the wp shaft its bigger then 6 3/16. so that may be the problem