-
Posts
3,961 -
Joined
-
Last visited
-
Days Won
120
Content Type
Profiles
Articles
Forums
Gallery
Events
Posts posted by cny first gen 71
-
-
Rodney had a post about who he sent his too. It was "sending my bumpers off" it gives the name of a place and I thing others have used them too.
-
-
-
Its a reflective barrier I got it at lowes someone suggested it I think it was Wallaby it is easy to work with and was on about 25 bucks enough to do the whole thing. Its cuts easy and forms in place good I used 3m spray adhisive seems to be working good.
-
Alright I have made progress over the last couple weeks waiting for the parts when it wasnt to cold
New burlap on the rear seats
New canvis on the front seat and also added some springs
New heat barrier and sound deadner
The covers and the carpet should be shiped early next week
-
I like all 3 years when I was looking I was looking for a 70 (first year) or a 72 (the year I graduated) but ended up with a 71 go figure But thats the first full year I drove so it all worked out.
-
Does it turn over but just wont fire? or wont turn over at all? As far as the exhaust it depends on local or state laws where the exhaust exits, noise may be a problem but around here anyway they really dont bother you unless you get playing to much.
-
Welcome to the site
-
Now that I didnt know on the 64 chevelle the frame stands were different from sb to bb
-
Does it do this after a fresh oil change also, maybe the oil breaks down a bit when it gets a little older. check to see if the oil is thinning out an bit maybe to much fuel running through the engine and not burning completly also smell the oil to see if theres any fuel in there. Just another thought.
-
so the igniter II is worth the xtra money compared to the original igniter. Sounds like the igniter II is the way to go?
Yes deffinatly but make sure the coil on the car is compatable with the system you get I used an accel coul but pertronix makes one too. I got mine from Jegs the guy I talked to checked to make sure the accel coil would work with it so I didnt have to buy a new one. Had the accel on the car already. Remember to follow the instructions.
-
Does the igniter II still all hide under the original cap for that factory look?
Yes
-
Hey I have a factory 4 barrel manifold for that enging it came out of a 68 327 or 350 according to the numbers on the manifold.
-
Would you need to weld it to the tunnel or could you use panel bond on it? Just a question not that I have plans to do it (unless I found the set up right)
-
I switched over to it 2 years ago with no problems at all, Hope I didnt jynx myself.
-
I got one from advanced auto it didnt work in mine so I ordered a factory duplicate from opg that didnt work eather so I have other problems also but I have the extra one from aap. It is a single tube one its similer to the one in the pic only with 1 tube it has the plastic float. If you want it and it will work twenty bucks plus shipping its yours. I think I paid around $45.00 for it.
-
Wow that looks and sounds great nice work but made me very nervous leaning over the engine wearing a tie i've herd of them getting caught in the fans before be careful. Great job
-
Thats all that was there it was under the front seat. none under back seat or on top of gas tank eather I havent checked the top of the golve box yet.
-
I didnt know that now I do. We learn something new every day Thanks.
-
Good luck Scott with start up. Do you use a battery tender I hear they work good. I use one on my tractor and have gotten an extra year out of that battery this year will be 2 extra if it starts in the spring well see. Good luck
-
See if you can find someone that makes the fake ones and if there not to expensive have them make one for you and look at it compared to the real deal see if there close.
-
Not a clue heres what mine looks like, its not pretty
I guess you lucky you have one you can read Good luck figureing it out
-
Like Tony said sometimes its better to walk away from it for a while. One night I fought tring to get the alt bolt in and got frustrated I called it a night. Came back in the morning and it slid right in, go figure. Sometimes you get a bit tired and have other things on your mind and it fights ya all the way. Some times you just have to sit back and reflect.
-
I assume because the holes for the chrome are still in the doors the factory chrome is going back on? I like that. Looks great so far a lot of hard work there cant wait to see it done.
Interior project
in Interior Tech
Posted
Went down and worked on the car more tonight got the tach in and all wired up even the light works when ya turn the headlights on and got the reast of the heat barrier all set now I just have wait untill the carpet and covers get here
oh yea I got another monte too one of our CSO's gave it to me
he's a monte fan too and his son has one. He's a member here but not sure if hes on the message boards