Guest Posted June 29, 2002 Share Posted June 29, 2002 I have been trying to find a set of headers to fit my 402 BB and am not having a whole lot of luck. Can anyone out there give me specifics on BB headers that fit correctly and are in the 300 dollar range. I also want coated(jet hot/ceramic)headers. I would of thought that they would be standard with the chevelles, at least. Any info would be greatly appreciated. Link to comment Share on other sites More sharing options...
Andreas Posted June 29, 2002 Share Posted June 29, 2002 I used Dynomax ceramic coated headers, same part no. as Chevelles on my 454. Driver side drops right in (from below) without any problems, had to dimple the passenger side a bit to clear the lower control arm, but nothing that a small ballpeen hammer could not handle Part no. 289-86110 at www.jegs.com They are around $230. Check the resto pics on my website for the looks... ------------------ 71 Monte 454 HO 5- Speed "FULMNTE" 86 Monte LS "The Gray Mouse" FOR SALE! Andreas' Monte Carlo Site Member NMCOA, FGMCC (Event Coordinator) ------------------------------------------ ------------------------------------------ "It ain't a car if it's not a Monte" Link to comment Share on other sites More sharing options...
Recommended Posts