monte70car Posted February 16, 2010 Share Posted February 16, 2010 Well I went to add another hard drive to my tower. I currently have a 1tb drive and a 80gb drive, the one I want to add is a 320gb. I hooked everything up to the hard drive idie plug to sata a power plug. I put the computer back together turn it on and it tells me the case has been opened no big deal. In the area for the drives I'm only seeing the 1tb and 80gb why ain't the 320gb showing up? The 320gb has the top of line vista on it. The jumper pin is set to slave like the other two drive. Quote Link to comment Share on other sites More sharing options...
TN454Monte Posted February 16, 2010 Share Posted February 16, 2010 I'm assuming when you say "in the area where it shows the drives", you are talking about the BIOS? Power down, unplug the power cord, and then pull the drive and switch the jumper pin to "cable select"... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.