Clever Idiot Posted May 20, 2013 Share Posted May 20, 2013 Anyone have pictures of what their front shocks look like installed? I'm trying to see if I need to get more hardware for installation than what came in the shock box. Plus the proper way the bushings and washers go on. I thought I had pictures of mine before I pulled them, but no luck. Quote Link to comment Share on other sites More sharing options...
monte70car Posted May 20, 2013 Share Posted May 20, 2013 DJ for the bushing and washer at the top of the shock it should have a washer then a rubber bushing shock stud slides up through the frame then another rubber bushing then washer and nut. As for the bottom you have two bolts that screw up into a capture nut on the lower control arm. Quote Link to comment Share on other sites More sharing options...
Clever Idiot Posted May 20, 2013 Author Share Posted May 20, 2013 Great! Thanks. Looks like I'm just missing the capture nuts - the hardware in the shock box included 2 washers, 2 bushings, 2 nuts, and 2 bolts. Should there be a nut on the backside of the bottom washer/bushing? Quote Link to comment Share on other sites More sharing options...
monte70car Posted May 21, 2013 Share Posted May 21, 2013 Nope should have a stopping point for the bottom washer to rest on.I borrowed this picture from a truck website the white disc is what the bottom washer sits on then the rubber bushing with step part facing up. Quote Link to comment Share on other sites More sharing options...
Clever Idiot Posted May 21, 2013 Author Share Posted May 21, 2013 Awesome, thanks again! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.