mikeringland Posted May 6, 2016 Share Posted May 6, 2016 I'm looking to replace the original faded trunk lock bezel on my '72. Is it just pressed into the trunk or are there nuts holding it in? Any tips or tricks I should know? Mike Link to comment Share on other sites More sharing options...
72-CLASSIC_RIDE Posted May 6, 2016 Share Posted May 6, 2016 It seems to me, there are nuts that have to come off from the inside of the Trunk & may be hard to get at with the trunk lock mechanism. I hadn't personally experienced it, but heard this some time back. If I'm wrong, someone will chime in on how to do it. Doug Link to comment Share on other sites More sharing options...
mikeringland Posted May 6, 2016 Author Share Posted May 6, 2016 I took a look at it this afternoon, the old one was just pressed in, came out pretty easily. The new one has nuts. It looks like I'm going to have to take lock latch out to be able to put the nuts on. Link to comment Share on other sites More sharing options...
Leghome Posted May 6, 2016 Share Posted May 6, 2016 I used the barrel nuts on the three studs on mine. Link to comment Share on other sites More sharing options...
Recommended Posts