Jump to content

erich

Members
  • Content Count

    17
  • Joined

  • Last visited

About erich

  • Rank
    Junior Member
  • Birthday 06/21/1973

Profile Information

  • Location
    nj
  • Interests
    monte carlos ,drinking
  • Occupation
    pipefitter
  1. I got it close, i removed the rubber cowl insulation and that seemed to help a little, still a tight fit and the back is raised . I have a little adjustment in the hinges , if that does nt help i ll lay it on without the hinges and see how it fits as you suggested , thanks.
  2. I just purchased a 2" cpwl hood from US body source. .The problem I am having is that I can't close it all the way. It hits the lip on the firewall. I can't see any way to correct this other than butchering the hood. Has anyone had a similar problem. Any input would be helpful. Thanks
  3. where can i find the screw in studs, i need to add a few after replacing a quarter panel , thanks
  4. your right, double up on the gaskets and they just fit. thanks
  5. anyone here experience a problem with aftermarket valve covers hitting the brake booster on a big block. iam using taller rockers and i need to use a taller valve cover
  6. OPGI sells metal inner fender wells for montes . There a different part number than the chevelle so you should nt need to modify them
  7. i tried the bottle/can opener and it worked good with no damage .Thanks again everybody
  8. i need to remove some drip rail moldings without damaging them , any advice would be helpful.
  9. YOUR IN LUCK , I SAVED THE ORIGINALS FROM MY CAR AND IT READS AS FOLLOWS. SUPERLIFT 251 69 3197338 DELCO PRODUCTS DAYTON OHIO. I BOUGHT NEW AC DELCO ONES FROM ROCKAUTO.COM. THERE NOT NOS THERE MADE IN VENEZUALA AND THERE RED
  10. erich

    exhaust diameter

    does anyone know what the stock exhaust diameter was for a 71 SS? i need to order some flowmasters to replace the stock mufflers and i'm not sure if there 2" or 2 1/4"
  11. is there a picture of this grille?
  12. my 70ss does not have air either I also had 2 72 mc small blocks with no air , people tell me they have never seen a monte with no air and I had 3 of them
  13. erich

    70 ss 390 hp?

    Thank you for the reply. what you are saying is that corvette 454 is also 360 hp it was just advertised at 390.Is it possible then that my car along with a few others were simply mislabeled and if so does that hold any significance as far as value.
  14. erich

    70 ss 390 hp?

    I purchased my 70 ss 15 years ago and the previous owner had claimed it was 390 hp. I do not have the build sheet because the car was re upholstered ,I do have the protecto plate with the crn code. Over the years I have seen 2 other cars in classified ads claiming the same thing .I did some research and found that there was a 390 hp 454 offered in the corvette and impala is it possible some of these made it into the mcss and how could you tell it apart from the 360 hp even though they share the same crn code.
×
×
  • Create New...