wandalee

When I dropped the steering wheel it pulled out from the back of the cluster...

Have any of you guys replaced a shift indicator on a column shift? How hard is it.... I need to replace mine....Thanks.....Wanda lee

Just installed a reproduction dash pad from opgi....What a joke...doesn't fit at all.... has anyone used the dash cap that fits over the old dash//// if so how does it fit.....also has anyone sprayed a vinyl dye on the dash cap..... my dash color is dark saddle, does anyone know where you can buy the dye that would match..... thanks

Thanks for the pictures....That's the way mine look..... wanda lee

The rubber on mine extends past the chrome strip on the quarter window... It's in the body shop now I don't know if they were installed right....Can you give me a picture where the front side window meet te quarter window...... thanks

Could someone post a picture of what the belt molding look like once installed ..... thanks... wanda lee

Do you have to trim the molding to fit around the rear quarter window...... thanks

Thanks...

what holds the sail panel to the roof other than the rear window molding and the side panel?????

What kind of carpet did you use.... Was it cut to size .... thanks

What color are the original trunk mats..The only color I see offered is grey from opg...Also did original trunks come with side and rear boards.... thanks.... wanda lee

I've seen it discussed before about how thin the lower replacement molding is and how careful you need to be when installing so it does't bend... Is there any out there that's better than the other..... thanks ..... wanda lee

So Sam did you decide on what company to buy your wide belt moldings from? I need to buy some and would also like to know where to buy them...... Thanks Wanda Lee

I have power to the horn, the horn must be bad.... tested earlier and it worked... Does anyone have a horn that they would like to sell...... thanks..... wandalee

Hot wired the horn to the battery, it works, its a mystery.....I will check the power out from the relay..... thanks

I checked everything and it appears that I put it back correctly.... when I press the horn I can hear a clicking sound coming from the horn relay....It must have power to the column.....I wonder if the horn relay is bad....

I took the steering wheel off my 72 now the horn won't work, is the horn fused separately or does it share a fuse in the fuse box. thanks... wandalee

I know it has been discussed before somewhere, but is the horsepower rating on a 1972 402 actually 245 ? Seems to me that it should be higher considering the size of the engine... I know they did something in 72 to decrease the horsepower....What all was done to the engine that year..... thanks.... wandalee

What is flitz and where can you buy it..... thanks

It's stuff like window trim and drip rails

Been trying to polish some stainless trim, can't seem to get that chrome like appearance .... has anyone had any luck with this...if so what kind of compound did you use.... used the tripoli brown, then a green stainless polishing compound...what should i use next..... thanks

You guys were right.... it wasn't making solid contact with the mounting bracket.... it works great now..... thanks

The housing that the bulb snaps into has a hot side and a ground side.... Nothing for the ground side to touch.....

I've been trying to get my light to work in the rear view mirror- I get power to mirror.... but the light won't light...The bulb is good.... I took the switch housing & bulb out of the mirror-I ran power to pos. side of the bulb housing & grounded the other side- the bulb lights up. There is a hot contact point in the mirror that when you slide the switch it makes contact, have power there..... where does it ground?....Help!!!!!

IS THAT CHROME PIECE GLUED TO THE GLASS.. HOW DIFFICULT IS IT TO REMOVE.... IS IT BETTER TO USE THE CHROME AND METAL ON THE CAR AND CAN YOU JUST REPLACE THE RUBBER...... THANKS