silver71mc Posted January 29, 2014 Share Posted January 29, 2014 I'm going to try to replace the aftermarket dipstick on my stock 402 with a original GM. I would like to know the length of the dipstick and tube, and if the tube is straight or curved. So far I have two different lengths for the dipstick, 21 3/8" with a yellow tip, and 24 5/8" with a red tip. The tubes are the same length 16 5/8" but one is curved and the other straight. Thanks for the help. Paul Quote Link to comment Share on other sites More sharing options...
72-CLASSIC_RIDE Posted January 30, 2014 Share Posted January 30, 2014 Here is a pic of the Dip Stick Tube installed in my 402 BB. It shows a bend vs. straight Tube. Not near car where Dip Stick can be measured but will try to measure it once I get over that way. Hope pic helps answer your question. Doug Quote Link to comment Share on other sites More sharing options...
silver71mc Posted January 30, 2014 Author Share Posted January 30, 2014 Hey Doug, Thanks for the pic. Paul Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.