My72Monte Posted July 23, 2015 Share Posted July 23, 2015 Alright, so I figured out that my brake lights aren't operating, that is unless I touch anything on the turn signal switch (meaning either the turn signal stalk or the hazard switch). And when I say touch, I mean just that. I literally just have to touch the hazard switch and the lights come on. As soon as I let off, they go out. My question is this, is there an "easy" fix or a common fix for this, or am I just going to have to bite the bullet and replace the switch assembly? Thanks for any replies and suggestions... Josh Quote Link to comment Share on other sites More sharing options...
monte70car Posted July 23, 2015 Share Posted July 23, 2015 Check the connedtion at the steering wheel you could have a broken wire or a losse connection. Do you have a tilt wheel or non-tilt wheel? Quote Link to comment Share on other sites More sharing options...
My72Monte Posted July 23, 2015 Author Share Posted July 23, 2015 Non tilt, column shift. On these, is there a plug at the steering wheel end or do the wires go all the way down the column and then plug in? Quote Link to comment Share on other sites More sharing options...
Leghome Posted July 23, 2015 Share Posted July 23, 2015 all the way to the bottom Quote Link to comment Share on other sites More sharing options...
My72Monte Posted July 23, 2015 Author Share Posted July 23, 2015 Thanks, that's what I figured but haven't gotten into it yet. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.