Guest Posted August 8, 2002 Share Posted August 8, 2002 How hard is it to remove the gauge cluster? Do you have to remove the entire dash? I have several lights out but bulbs are good. My guess is the printed circuit board is at fault. Link to comment Share on other sites More sharing options...
Guest Posted August 8, 2002 Share Posted August 8, 2002 This has been on several times. It is not very hard, just takes time. Do a search and it will come up several times. There is six screws to take out. Two on each side, top and bottom. Then two in the middle. I redid mine last year. Did you check the fuse? And good to hear from you. There is some great guys and girls on this site.Welcome, David Link to comment Share on other sites More sharing options...
Guest Posted August 8, 2002 Share Posted August 8, 2002 Welcome aboard the first generation Monte Carlo sight 71montinicarlo, you can get a new circut board at www.musclecarsonly.com good luck. ------------------ LLOYD@firstgenmc.com http://home.attbi.com/~adgtrunklid Link to comment Share on other sites More sharing options...
Canuck Posted August 9, 2002 Share Posted August 9, 2002 My circuit board is gone too. A couple of my dash lights will not work in the guage package. Link to comment Share on other sites More sharing options...
Guest Posted August 9, 2002 Share Posted August 9, 2002 I have removed the gauge cluster only to find a broken wire in the circuit board. My brother was at the house last night and he said he will take it to work with him and fix it. That saves me some money, paddock has them for $99.99. Has anyone on this board installed a custom gauge assembly in their Monte? Link to comment Share on other sites More sharing options...
Recommended Posts