colonel Posted November 9, 2016 Share Posted November 9, 2016 Are the little clips that go on the radiator support that hold up the fan shroud still available?? I let the 2 I had go with the other car thinking there were 2 with new one but I can only find 1 on the fan shroud and need 2 for the modified set up I am installing. Also, put engine and trans in a different Monte and the trans tail shaft is about 3/8 inch off center towards the drivers side. Big deal or not? Still lots of clearance for driveshaft. Quote Link to comment Share on other sites More sharing options...
monte70car Posted November 9, 2016 Share Posted November 9, 2016 Kevin you can pick up the shroud clips at any of the aftermarket parts vendors, I believe I picked mine up at ss396.com. The u-joints will move the drive shaft back to the center. Quote Link to comment Share on other sites More sharing options...
colonel Posted November 10, 2016 Author Share Posted November 10, 2016 Thanks. I looked through The Parts Place catalogue and couldn't find them so thought they were going to be tough to find but a google search shows they were used well beyond the First Gen Monte's. Found them on ss396 site and for $3 I was willing to order them until they wanted $46, also in US money for shipping with UPS. That only further confirmed my loathing of Ultra Poor Shipping (UPS) so will find elsewhere. Not sure how the u joints will move the tail shaft closer to center but so long as it is not a concern I will carry on. Thanks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.