dan402 Posted September 10, 2022 Share Posted September 10, 2022 Good evening all. I would like to know what the amperage rating for the fusible link 6 inches above the starter positive lead on the wire that goes to the alternator according to the schematic. Thanks. Quote Link to comment Share on other sites More sharing options...
John S Posted September 10, 2022 Share Posted September 10, 2022 I don’t know for sure the amperage rating but I believe it is a 10 AWG wire which I believe is 30 Amp. A fusible link should be two sizes smaller than the wire it protects. For example if you are protecting a 10 AWG wire you should get a 14 AWG fusible link. I think I’m correct on this if not somebody can correct me. John S Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.