dan402

Hey guys and gals. I’ve read all of the bad reviews about OPGI over the years but have had a positive experience with them until now. They have been shipping the hood and cowl kit that I ordered on 9/10/23 piecemeal and attempting to charge me full price plus shipping for each of the items as they come in. Besides that they have also cancelled an item from the same kit because I didn’t reply to their email quickly enough and their CSR told me that they were not mind readers.

Thanks for the encouragement guys. I have plenty of heaters to keep warm , no worries.

Made some progress today.

Thanks guys. I am using 325 rear gears. I'm slowly making progress , hoping to bolt the trans up and put the intake on the new motor today.

Going with a 700r4

Operation 454 and AOD has commenced.

Hi Willie. Is Carlisle this weekend or next weekend ?

Very cool. It’s great when you come across another 1st Generation enthusiast in the wild !!

Good afternoon everyone. The trunk floor in my 72 is currently mostly gray ,( ( painted over black ). Which is the correct color ?

Happy New Year ! I am looking for an overdrive trans for my 72. I had planned on changing over to a 4 speed manual , but due to a recent left knee injury am reconsidering. I have the pedal kit and everything to do the 4 speed swap which i purchased from a group member when he upgraded to a 5 speed.

Good evening all. I would like to know what the amperage rating for the fusible link 6 inches above the starter positive lead on the wire that goes to the alternator according to the schematic. Thanks.

Thanks everybody.

Good evening everyone. Will 235/70/15 tires fit on the rear of my 72 ?

I replaced my original plastic ones with metal ones I got from Koniks about 5 years pho and the powder coat has peeled in the last couple of years and rusted. I have plastic ones that I just got from The Parts Place and will be installing them soon.

I stopped at the car 3 times over a couple of hours and never saw the owner so I didn’t get a chance to ask.

Mine was blocked in by several other cars so I took the Lexus.

Saw this beautiful SS at a show in Jamesburg NJ at their National Night Out.

Welcome John. Very nice car !! I just attended my first club event in Carlisle and met a great group of people that couldn’t have been more friendly and helpful. Saw some beautiful cars too !! Next year’s eastern meet will be there and I hope to see you there.

Australia had the left handed floor shifters. Special order.

Hello all. I would like to replace the lens on my gauge cluster and am unsure of how to attach the new lens once the original is removed. They seem to have been melted on.

Good evening everyone. I need to replace the instrument panel circuit board and lens in my 72. Any recommendations ?

Hello all. The new bumper I got for my 72 came without mounting holes for the bumper guards. Did they come from the factory both ways ? Thanks , Dan

Sorry for the vague description. The inner fender well is the problem, not the blower motor.

Happy Saturday to all and Happy Easter to those of you celebrating it. I had to replace my blower motor so the inner fender well had to come out. It is in very rough shape so I went on ebay and got a replacement made by Dynacorn from The Past & The Future. It was the wrong color , no big deal to paint to match. Some of the mounting points were not drilled , again no big deal. Tried to install it and the fitment is not even close. Can anyone point me in the right direction for one that will fit or a good used one ? Thanks in advance.