Vaihlor Posted October 5, 2010 Share Posted October 5, 2010 Hi everyone, here is the problem with my transmission : I've rebuild it with a kit, totally cleaned up, and It doesn't work correctly at all. At the first start It was working quite good, but running a certain time with no sufficient oil, without any speed engaged (I was running my just rebuilt small block), at the second try, no speed works, except the first but wheels turned reverse ! After that I've disassembled twice the trans, changed the front pump, the trans, cleaned again, and It's always the same, no speed unless the 1st, reversed. I really don't understand what's the matter, insufficient pressure ? Dead converter ? (It's the old one) Please help me, Can't see the key of problem... Thank you by advance, and for reading my novel. Sincerely Julien Quote Link to comment Share on other sites More sharing options...
Vaihlor Posted October 5, 2010 Author Share Posted October 5, 2010 That's summit tech replies to me, it seems to be that, but i can't see what can i do for that .... Quote Link to comment Share on other sites More sharing options...
kc8oye Posted October 6, 2010 Share Posted October 6, 2010 i would say there is a problem with the valve body mating to the case. Quote Link to comment Share on other sites More sharing options...
Ian Posted October 6, 2010 Share Posted October 6, 2010 Or one of the little check balls are missing / in the wrong place.. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.