Mike G Posted April 8, 2013 Share Posted April 8, 2013 Here is a good one. Hope someone can point me in the right direction. I am replacing the 71 Monte 10 bolt with a Moser 12 bolt from a 66 Chevelle. Do I buy rear lines for a 66 Velli or a 71 monte? Thanks, Quote Link to comment Share on other sites More sharing options...
footballubet Posted April 8, 2013 Share Posted April 8, 2013 If it came with the backing plates from the Velle you may want to go with those as the angle or height from the axle to wheel cylinder could be different. If you are using stainless steel lines they don't adjust very easily. Quote Link to comment Share on other sites More sharing options...
wallaby Posted April 9, 2013 Share Posted April 9, 2013 I think everything is the same except the width of the rear. You would get the better fit with the Chevelle lines, IMO. Quote Link to comment Share on other sites More sharing options...
Mike G Posted April 9, 2013 Author Share Posted April 9, 2013 Thanks guys and yes I am going with Stainless. LOL I guess I need to post over at "What did you do to your Monte today" Purchased Chevelle brake lines. Quote Link to comment Share on other sites More sharing options...
Andy's Auto Posted April 10, 2013 Share Posted April 10, 2013 66 velle is 53.5 plate to plate, 70 Monte is 54.5. Get the lines for the 66, and dont forget the rubba hose. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.