leelee Posted May 31, 2013 Share Posted May 31, 2013 Hi Y'all, haven't been on in a while been busy getting the 72 Monte back together. I have the chrome back around the windows but it doesn't seem to be snapping on very tight especially the two little corner pieces at the top of the door windows. Is there some way I can get them tighter (all of them) Should you glue them? Link to comment Share on other sites More sharing options...
Leghome Posted May 31, 2013 Share Posted May 31, 2013 I had that problem with my 72 and I just put a little windshield urethane on the back of them. Not really the correct way but my feeble mind was not working well at that time. Link to comment Share on other sites More sharing options...
leelee Posted June 5, 2013 Author Share Posted June 5, 2013 Thanks Larry, So did your brain start working and come up with a better idea (: Link to comment Share on other sites More sharing options...
overdrive Posted June 5, 2013 Share Posted June 5, 2013 The drip rail stainless had an adhesive of some kind under it from the factory. I've used a small dab of bathtub caulk to keep them from sliding. It works great. Dan Link to comment Share on other sites More sharing options...
Leghome Posted June 5, 2013 Share Posted June 5, 2013 No leelee no better ideeeeee but Dan's is a good one and less expensive. Link to comment Share on other sites More sharing options...
Recommended Posts