Nate

New quarter lol yes it's all in the works I have been itching to do some paint work so now I have too I just pickedup some new paint guns and a DA. I kinda want to paint it like Heckeng car with a twist still want to see more pictures of his car. So Heckeng get me some photo's lol! I am going to run Strange Axles with my mini spool in it they come in tomorrow should hold me over for now. I def need a 4 link under it to.

Oh ya this what I got for being cheap and not getting axels sooner broke the wheel right off on the street at that!

Yes I have a 10 bolt the axels are 28 spline. 30" shaft length. 1.780" pilot size so I should be good then right? I will be running C clip eliminator aswell

Any know Axel sizes or will 28 spline. 30" shaft length. 1.780" pilot size fit in my Monte these are out of a From a first generation Camaro Thanks Nate

Reaper. I would love to see some Video of your ripping. I used 1/8th " Lexan and larger rivets. If you take it to the track make sure your get the numbers off that night or there on for good lol.

Which car sounded supercharged? Thats the Monte just a lil blower.

My Monte Flowmater 40's hooker LT Headers. We were at work just killing some time Monte had some cold tires but still pulled it off. http://smg.photobucket.com/albums/v106/maxJDM/Monte%20Out/?action=view&current=4f498221.pbr

Well it is what it is….HATERS!but It was at a weight station off of the interstate a state owned station so I would think those would have to be calibrated correctly legally. My car was gutted 100% stock front and rear bumpers stock fenders fiberglass trunk, hood and 1/8” Lexon aside from the driver and passenger doors. I have no dash no power steering no heat air fan’s radio carpet no motors rear window tracks ect.one racing seat, rewired the hole car with only what I needed. Car is bare bones all the inner fenders have been cut in the rear and front have now.

Harris Q? Do you have tranz break? Just asking cuz I have my ALT to my frame like you but if I used my Tranz Botton I twist the frame to much and pops the belt off. Have you run your car? I really need to stiffen my frame more! Your Cage looks BAD [you said a naughty!].

LOL I ya IDK scale was off the "I" state owned place would think there scales are right on the money but u could be right who knows. It is what it is! I have a 5 gallon fuel cell was not likly on E as my MPG are not good. "is it dual purpose?" Daily driver lol...But I do drive it to work witch is not to far from home. I would drive it more only thing is tranz pan is only 2" from the ground so I have to know the road. Car was stripped down to the shell every thing wiring dash windows then only reacplaced the stuff I need to make her go and stop Lexan windows all but passenger and driver side windows. Fiberglass trunk and hood aluminum dash and door panels. I have not Heat, Air, Fans Radio, and or any thing power. (It's a race car)

Ok here we go

I am about 200lbs It's has Lexan windows fiderglass trunk and hood nothing inside the car. I have picz if you want to see it. I have iron head and a Turbo 400 on it so could cut more LBS.

Opps! and thanks!

I have a 1972 with a small block stripped down to the Max she was on the scales with me in it she was right at 2700lbs Any one eles had there on the scales? Or can give a good guess what there is? What is LBS stock?

I use Tractor Tubes with a little Baby powder cost about $7.00 works on 9's cars I run MT ET streets on my Monte

Car looks and sounds tuff I like!!!!!!

One more...Car look great!

All I can say is I was a puss! lol need to get the timimg set up It runs like a race car will be very fast tho! I have one more pic these were all from Camara phones so they suck but still looks cool (I think)

Got it almost all togeather took it for it's 1st ride with all the new stuff.

My banker lol Oh and motor went in and all is running (no turbo's yet this winter) Picking up my tires today will pull it out tonight after work and take a few more pics with good rims and tires I can't wait for that!

Motor and tranz going to go in this weekend so I took some picz of the mess I made also the rear end will take picture after once every thing has been cleaned and POR'ed Will look better once cleaned up was setting for a bit. The parts car and fan club lol There are a few more pics here http://smg.photobucket.com/albums/v106/maxJDM/Monte%20Carlo/

haha Harris Q I have seen your car before mines is more like the Ugly little bro of your car lol. I really like your car it's funny those pics are old I have almost the same rims as u too.

Sorry did have time to get any pics I had this one of the motor on my phone lol hi REZ look out

Thanks guys it's not a tubed just moved the shocks there drag coil overs. I will take some more pictures tonight when I get home. Not sure what kinda of time I am going to pull car was going 10.60's with a 500-550hp small block and a TH400 car is light. Tires are just some junk ones stock car tires they rub my fenders are cut too so there is no lip. I will for sure snap some more pictures of every. The motor is just a 406 with some GM 292 heads.

Thanks, and yes it will be on the road I am hoping to take it to work and out on the weekends. It's nice that I am only 10 mins from work. See how long the law lets me get away with it. Oh than that Real Street Drags is what I am building it for. I will try and get some pics of the motor I have twin turbo kit on it right now.