JerseyMonte

Here's a nice one well done in S Jersey

Not an SS but these are thin line whitewalls by Cooper tire Co Don't think white letter or red line were available from the factory

Mine need replacing some cracks and extra holes can you imagine that only 45 years old and cracking already I guess they don't build them like they used to

What would be involved to replace my 350 turbo with a late model 6 speed auto trans. I have a 2:73 gear I have a Tahoe with the 6 speed and it has a low 1st gear ratio I believe 4.03 to 1 the Tahoe has a 308 gear but the tranny pulls the almost 3 ton beast very well

A neighbor of mine has a late model Tahoe painted Victory red it was not a regular production color, he bought it used and just thinks its an average garden variety Tahoe. I know some fleet orders have many choices not offered to the public,

I've seen GM build many so called prototypes some were just ideas they followed through with never intended to go into production. I remember a few years ago Barrett Jackson had a run of these cars all sold with no titles one was a 1996 full size SS with a 502 engine, maybe they snuck a few Montes out the same way back then.

Show in PA at Rose Tree Park Media PA Veterans tribute

Handed out cards, one member was there, the hood scoop ? sorry for the poor quality photos lousy cell camera here's a couple more from a show today in PA

eight or nine first gen montes at local cruise estimated 1700 to 2000 cars attended show at Flemings in South Jersey

Just got my November issue and enjoyed reading a nice writeup on A 70ss The article mentioned the first gen club.

Just check it out carefully for rust especialy the heads. The block should have the freeze plugs removed and given a thorough cleaning. They have a tendency to ingest sand and or mud I have brought many "sinkers" back to life after being completely under.

I have a number for a 396 heat stove but I think the manifolds are the same. 3976061. I knnow they are different,but I got the upper and lower for my 350/300 from a GM dealer both cost around ten dollars

Roger Penske had a Chevy dealership in Philadelphia in the 60's 70's he had all the good stuff there in the showroom LS 6'S in any model they were available in, Z28's what color do you want? He was well respected by GM and got what ever he wanted from them I felt like a kid in a candy store when I went in there If I only knew then what I know now

I switched out the engine in my 65 GTO way back then to a 421, tri power and all, it looked to the untrained eye like the 389 but fooled them all when the time came. [not going to say light to light]it's illegal!

Hi Members, Can anyone post a picture or tell me the location of this decal, I believe it is on the AC evaporator housing on my 70 MC Thanks in advance

Is there enough clearence to the firewall to use an HEI distributor I have a complete HEI system, didn't try it , but just judging it may be close. I have a stock 350/300 Car is on jackstands for the winter going through maintenance and up grades, Reduction gear starter, r and r exhaust recoat manifolds replace heat stove parts, new spark plug heat sheilds,heat riser, change engine , trans and gear oil. Found out it has a 2.78 gear Thanks