71 MONTE 4 YA

IT'S BACK!!! ON EBAY

HERE IS A BUMPER PAD ON EBAY!!!

So happy everything went as planned!! Continue on your road to a full recovery Rob.

Thanks Tony!! All advise taken seriously because I will definetly be driving the Monte. Guess I will have to be more of a defensive driver. Originally Posted By: cny first gen 71 I like it Rodney good luck with it I hope it comes out just like you want it. Thanks Steve!!! Originally Posted By: bigscaht thats a nice color...pretty close to kandy brandy wine by HOK!! Yelp Scott that Brandywine was my first choice with Nova orange basecoat, but that is usually seen with lighter interiors. Plus I got a great deal on this paint so here we are.

Well as of now the colors I have are readily availiable so I'll be picking up as much as needed plus a little extra.

Ok this is the official color that I'm going with. I came across three quarts of uk11 Apple Red Kandy and two quarts of bc02 Orion Silver base for a couple hundred. So I'm going to grab up a couple more quarts of the Red and one of the silver and whatever else I need. Here is a

Will a driveshaft from a 64 4speed GTO work in my 350/350th Monte. It is 60 1/4 from the center of the ujoint cap holes and has a 27 splined yoke on it. This will be the drivshaft that I will have shortened when I put the BOP rearend in the Monte

The hub centric rings will fit inside the center bore of the wheel and take up the space to make the wheel fit tightly around the hub.

Summit sells them. Contact them, they should be able to help.

Thanks Everyone for the comments!! I got quoted $82.70 for a three quart system consisting of semi gloss, marine clean, and prep and ready. Along with the pint that I am getting from my manager I think I should be fine.

My store manager gave me a pint size can of the stuff and a brush. I figured if I get another pint or two I would be ok. I really just want to do underneath the car and maybe the floorboard and inside the bottom of the doors. I also would like to do my metal inner wheelwells. I plan on keeping my Monte and drive it also and if I get caught in diverse types of weather I want it to be OK.

Anybody used it? How much is needed for a Monte's frame? Do I really need to use the Marine Clean and Prep & Ready? I am not removing the body from the frame. Is there any way to get the top of the frame done? All help is appreciated. Thanks

Darren your PM box is full. I need the diagram please. I sent an email to the address in your profile. Sorry to interupt this thread. Thanks... Rodney

Thanks David!!!

Hey Tony!! How are you feeling? I picked those up off of Craigslist from a guy in Wooster, Ohio. That's the price he had them listed for. He said he's had them for awhile and he thought he had put them on a Camaro he sold, but when he looked in the box there they were.

Definetly a good job on the post Dennis and the pictures. This will come in handy for everyone here. Maybe this could be made into a sticky for future reference!!

Got some nice polished aluminum valve cover breathers with pcv valve. Very nice, got some weight to them. They can be disassembled and cleaned. Got them for half of what others were selling for on Ebay.

Got the wires today. Brand new!! $15

Thank you Mark!! I'm getting a brand new set for $15!!

Anybody ever heard of or used this brand? WIRES

I use Photobucket with no issues at all.

DAY 6!!! ALMOST DONE!!

DAY 6!! INTAKE AND CARB ON!! I WILL BE PUTTING THE ENGINE BACK IN SOON FOR THE INITIAL BREAK IN.