BlueRidgeMike Posted September 18, 2015 Share Posted September 18, 2015 Hi Guys, I'm hoping someone can give me some advice on a good set of headers that will fit on my 350 with factory a/c. The engine is basically stock with an Edelbrock intake and Holley 4 barrel. My goal is to pick up a bit of low and mid range torque, and I'm looking for some advice. I need to find something that will fit, and I want ceramic coated headers too. The guy who does my mechanical work wants to put shorty headers on but that seems pointless to me. If I'm going to the expense of replacing the entire exhaust system I would like to experience some slight performance gain, which as I understand it, shorty headers don't really provide. So has anyone had good luck with a set of full length headers that fit well with a setup similar to mine? Quote Link to comment Share on other sites More sharing options...
South Carolina 72 Posted September 18, 2015 Share Posted September 18, 2015 I have a set of long tube headers on mine, 72 with a 350 and A/C. They were on the car when I bought it and they fit very well. I don't know the brand though. Sorry Quote Link to comment Share on other sites More sharing options...
Leghome Posted September 18, 2015 Share Posted September 18, 2015 I have Hooker headers on my 72 with a 350. I had them powder coated 4 years ago but I do not know what model of hookers they are. Quote Link to comment Share on other sites More sharing options...
BlueRidgeMike Posted September 18, 2015 Author Share Posted September 18, 2015 I have Hooker headers on my 72 with a 350. I had them powder coated 4 years ago but I do not know what model of hookers they are. Thanks. Does your 72 have AC in the original location? Quote Link to comment Share on other sites More sharing options...
Murphy Posted September 18, 2015 Share Posted September 18, 2015 Hookers here also, painted with Eastwoods high-temp paint (2 coats) 2yrs and they look great.......... Quote Link to comment Share on other sites More sharing options...
Leghome Posted September 18, 2015 Share Posted September 18, 2015 Yes I have the A/C compressor in the original location. I had a special bracket made for the lower rear A/C mount to attach to. The new bracket spans the second to third bolts holding the header to the manifold and a spacer for the compressor and another for the power steering pump. I will try and get a photo of said bracketing in a day or two. I had sinus surgery on Tues and am just now starting to get around. You might remind me after this weekend to get he photo. Quote Link to comment Share on other sites More sharing options...
cbolt Posted September 18, 2015 Share Posted September 18, 2015 I am running Holley Flowtech headers which I had ceramic coated by a local shop. They work well, fit good with factory ac, and have held up well. You will have to dimple them slightly to make the fasteners easier to reach, so you will want to do all that before getting them coated. Quote Link to comment Share on other sites More sharing options...
BlueRidgeMike Posted September 18, 2015 Author Share Posted September 18, 2015 Thanks. I'll check into both the Hooker and Holley brands. I thought it would be strange if no manufacturer made some to fit. Quote Link to comment Share on other sites More sharing options...
Leghome Posted September 18, 2015 Share Posted September 18, 2015 I tried to get wome photos of the special made A/C bracket. If you look closely you can see where it spans the header tube over number one cylinder. The pic are not the best but it was hard getting the camera down into that tight area. I had to make special spacers to go behind the bracket for the header bolts to attach to the head. I hope these help you. The guy who made my bracket is a really good fabricator and can make about anything. Quote Link to comment Share on other sites More sharing options...
BlueRidgeMike Posted September 18, 2015 Author Share Posted September 18, 2015 Thanks for doing that! Quote Link to comment Share on other sites More sharing options...
dbreese Posted September 19, 2015 Share Posted September 19, 2015 Hooker Headers part # 2451. Had them on my 72' when it had A/C. David Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.