my1st monte Posted May 10, 2008 Share Posted May 10, 2008 I have new dust covers for inner fenders. I just need to know what other members have done to install them. I put steel inner fenders inthe front. Link to comment Share on other sites More sharing options...
footballubet Posted May 10, 2008 Share Posted May 10, 2008 Todd, I'm putting in the steel inners and not sure if I'll put the splash guards back on. Link to comment Share on other sites More sharing options...
Big Jim Posted May 10, 2008 Share Posted May 10, 2008 The guy doing mine said he's not going to use the staples. Instead he will use the small Cotter Pins. He said it works well and is easier to install. Link to comment Share on other sites More sharing options...
monte70car Posted May 10, 2008 Share Posted May 10, 2008 i used self tapping srcews to hold the dust covers on my Link to comment Share on other sites More sharing options...
Cali4nia Monte Posted May 10, 2008 Share Posted May 10, 2008 Todd, I'm putting in the steel inners and not sure if I'll put the splash guards back on. You'll be sorry....Mike wont put our on and the engine compartment gets dirty and splashed if you go through any kind of puddle....and I am not talking about after rain puddles...I mean even a puddle from somebodies sprinkler system. Link to comment Share on other sites More sharing options...
Recommended Posts