Jump to content

Diaphragm for auto leveling compressor


muhrman

Recommended Posts

My pump is rebuilt but have a very small hole in the diaphragm. I believe we can patch it but because of it's age are there any other solutions ? 

Thanks,

Mark

Link to comment
Share on other sites

Hi Mark

I have tried a couple of differant materials, one was the top of a solvent wash glove that was fabric and rubber combo. I built a mold and heated it to 300 for 1/2 hour, not sure how long it will work but ran it for 1 summer. I used a diaphram material for another one and it is more difficult to work with but probably will last forever. I heated this one as well but it didn't take on much of the mold shape and went quite flat again. Attached is the info. Hope that helps.

Grant

16477078425261506204342.jpg

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...