snomobeelr Posted August 3, 2009 Share Posted August 3, 2009 I didn't take enough Pictures and dont remember what direction the motor mounts/Frame mounts bolt on and the Trasmission Bracket that the shift rod with the Spring faces. Link to comment Share on other sites More sharing options...
monte70car Posted August 3, 2009 Share Posted August 3, 2009 My frame mounts are on the back side of the cross member. Link to comment Share on other sites More sharing options...
snomobeelr Posted August 3, 2009 Author Share Posted August 3, 2009 so the mount is closer to the Firewall and the 2 fingers face the Core support correct? Link to comment Share on other sites More sharing options...
kc8oye Posted August 20, 2009 Share Posted August 20, 2009 yep that's right. if you mean the bracket that attaches to the frame that supports the shift rod. .that's mounted so the 'cup' faces the transmission, as the nylon washer sits down in that cup and is held there by the spring. if you need replacement springs and washers call leo Link to comment Share on other sites More sharing options...
Recommended Posts