dimitri Posted May 6, 2012 Share Posted May 6, 2012 i was adjusting the rockers the other day and was wondering why all of the push rods were not spiting oil while running how does the oiling system work ? please help!!! Quote Link to comment Share on other sites More sharing options...
black07ss Posted May 6, 2012 Share Posted May 6, 2012 When you rebuilt the motor did you remove the oil galley plugs by the timing chain? They are about 7/16" in diameter. They look like freeze plugs on the timing chain side Quote Link to comment Share on other sites More sharing options...
Mo's70MCs Posted May 6, 2012 Share Posted May 6, 2012 adjust your valve lash. If you had missing oil gallery plugs, you'd get no pressure to the valve-train, the same as not aligning the rear cam bearing oiling holes. Proper "Zero" lash is a must. Quote Link to comment Share on other sites More sharing options...
dimitri Posted May 7, 2012 Author Share Posted May 7, 2012 bob i did not touch them as i know it and i tryed letting the engine warm up and after two to three min. it did trickle out of the push rods but did not squirt out but i am getting oil up there Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.