iceman Posted May 20, 2006 Share Posted May 20, 2006 Does anyone have their Level Control functioning? I'm trying to sort out my compressor and need some help. I'm trying to fill the compressor so that I can get air to the shocks. It looks like there is a hole in the regulator that won't allow the system to be charged from an off-line source such as an air compressor. I can't make heads or tails from the assembly manual (and I'm an engineer). Maybe it's because I don't have pictures of the special tools that GM says are required. Any troubleshooting information or ways to charge the system using an air compressor would be appreciated. Iceman (SS with a sagging ***) Quote Link to comment Share on other sites More sharing options...
wallaby Posted May 20, 2006 Share Posted May 20, 2006 I haven't had that problem, but maybe I can help anyway. When you put air in the schrader valve, where does it go? Is it spewing out somewhere, or nothing is even going in? Quote Link to comment Share on other sites More sharing options...
71ss454 * (Larry) Posted May 21, 2006 Share Posted May 21, 2006 ice down t the end of tjis page there is a print of how it works Quote Link to comment Share on other sites More sharing options...
iceman Posted May 21, 2006 Author Share Posted May 21, 2006 Thanks Larry ... I knew that I saw those somewhere. Now ... the air is escaping from the what I think is the regulator valve at the top of the second print. There is a schraader valve at the bottom of the regulator and a small hole above it on the side of the service vavle. I don't have the cover that fits over the regulator. In the assembly manual, it appears that this is just a rubber cover that snaps over the lip on the regulator. I can't imagine that that would hold 140 psi. Thanks for the help. Larry\'s prints Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.