george_1970_406 Posted September 21, 2013 Share Posted September 21, 2013 Can this be completed? I would like to do it in the car! Quote Link to comment Share on other sites More sharing options...
SPLATT71MC Posted September 21, 2013 Share Posted September 21, 2013 It's possible but you may have to lift the engine up a little bit to get the pan out. Quote Link to comment Share on other sites More sharing options...
Mike 57 Posted September 21, 2013 Share Posted September 21, 2013 It can be, little messy but it can be. Quote Link to comment Share on other sites More sharing options...
footballubet Posted September 21, 2013 Share Posted September 21, 2013 You'll need to jack the engine up. If you take the motor mount through bolts out, lift the engine, put the bolts back through the brackets on the block and set back down on them you should have enough room. You will also need to turn the crankshaft so the counterweights will clear the pan as you remove it. Now is a good time to use a one piece oil pan gasket. It's definitely the way to go. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.