amsterdam84 Posted September 30, 2015 Share Posted September 30, 2015 So a while ago I got a running 454 for a decent price here in Canoodia though it did not come with any accessories. I had previously purchased an alternator and ps pump so I'm covered there and still haven't picked up the water pump. My desire right now would be to put on a serpentine belt setup on it. Sadly I haven't been able to find one that does all the accessories without A/C and all in black. Any leads? On a side note, I was thinking of going to a lumpier cam. I believe its the stock one in it. It has an aluminum intake but otherwise the heads are still the original iron. Any ideas on that? I've never done a cam so will have to look into the difficulty of removing it. Quote Link to comment Share on other sites More sharing options...
cudax Posted September 30, 2015 Share Posted September 30, 2015 Go to BulletCams.com and talk to them. They will help you figure out exactly what you are trying to achieve with the motor and grind one out for you at a reasonable price. Mike Quote Link to comment Share on other sites More sharing options...
amsterdam84 Posted September 30, 2015 Author Share Posted September 30, 2015 Thanks Quote Link to comment Share on other sites More sharing options...
monte70car Posted September 30, 2015 Share Posted September 30, 2015 For a serpentine March proformance does alum pulley setup. I've seen Chevy with a serpentine kit without ac for $700 Quote Link to comment Share on other sites More sharing options...
amsterdam84 Posted September 30, 2015 Author Share Posted September 30, 2015 I saw the offerings from March last time I went to Carlisle but I'm pretty sure I saw it noted that A body fitment wasn't available. Could be wrong though. At least for the set I was looking at. I'm trying to stay away from the chrome/aluminum look as much as possible and keep things low key. Quote Link to comment Share on other sites More sharing options...
Sam (Bones) Posted September 30, 2015 Share Posted September 30, 2015 Summit Racing carry a few different manufacturers Quote Link to comment Share on other sites More sharing options...
monte70car Posted October 1, 2015 Share Posted October 1, 2015 Here is the March setup in my Monte its there two serpentine belt setup. Now if you want to go for a one belt setup I would go with this one http://www.summitracing.com/parts/nal-19172806/overview/make/chevrolet Quote Link to comment Share on other sites More sharing options...
overdrive Posted October 4, 2015 Share Posted October 4, 2015 Notes show that setup won't fit A bodies. Dan Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.