Jump to content

Rear Coil Spring recommendations


Recommended Posts

I installed Moog OEM style springs in my car which brought it up to stock height. It is amazing how much the original springs sag.

 

00314.JPG

Link to comment
Share on other sites

Several ways to bring your old springs back to life "other" than replacing them. One is to install airbags inside them...this way you can raise it exactly that 1" you want. Replacing them can cause them in some cases to be either too high, the same, or even lower.

Link to comment
Share on other sites

1970 with new springs in all 4 corners:

The rear is 24.5 inches and the front is 26.75 inches.

 

1971 with original springs in the front but new in the rear:

The rear is 24.5 inches (same as the 70) but the front is 24.75 inches. The 71 is 2 inches lower in the front.

 

Both cars have 245/60/15 tires on 15 inch rims.

Link to comment
Share on other sites

Steve, Thanks for chiming in on this. I could not remember the Moog number (old age) and wanted to respond, I had a friend go with me to the Syracuse Nat's (Scott), and had commented on how nice my car rode.That was the the 1st time he was ever in it. Definitely the springs for a cruiser Monte!!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...