Kevin Wiles Posted July 3, 2008 Share Posted July 3, 2008 The piece of sheet metal that is connected from the core support to the inner fenders. There are I think 4 bolts holding it on to the core and 4 holding it onto the inner fenders. These seem to always be either rusty or at least pitted. Link to comment Share on other sites More sharing options...
bobsmc Posted July 3, 2008 Share Posted July 3, 2008 not that i know of . glass bead them and paint them . get new speed clips and you should be alright , unless they are rotted out in which case i may have a solid set. bob Link to comment Share on other sites More sharing options...
McCall72 Posted July 4, 2008 Share Posted July 4, 2008 If you are going to POR-15 anything, those are good candidates. Mine actually looked pretty decent after a good sand blasting... Link to comment Share on other sites More sharing options...
7tonemonte Posted July 4, 2008 Share Posted July 4, 2008 I sandblasted mine also, my passneger side one under the battery tray almost dissappeared! I was going to bring what was left to a metal shop to make me a couple, but we patched it up, and to tell you the truth, you cant really see them anyway Link to comment Share on other sites More sharing options...
Sam (Bones) Posted July 4, 2008 Share Posted July 4, 2008 Leo has them too, replaced one of mine, he has a bunch Link to comment Share on other sites More sharing options...
Recommended Posts