Jump to content

Fuel gauge sending unit problem


john57

Recommended Posts

Hello,

 

My fuel gauge always reads full. Here's what I tried; I disconnected the brown wire connector in the trunk which goes to the sending unit. I'm seeing 12V on the side of the connector going back to the fuel gauge. Is this correct. How can I check if the problem is the sending unit or the fuel gauge. Can I connect a resistor from the brown wire connector (which has 12V on it) in the trunk going to the fuel gauge to ground. I'm thinking maybe the needle should move? This problem just started, it's worked fine for years.

 

Thanks,

John

Link to comment
Share on other sites

Bones,

 

I connected a 200 ohm rheostat to the brown wire in the trunk which leads up to the fuel gauge and walla the fuel gauge moved as I turned the rheostat. Time to change the sending unit.

Best part is I get to cruise around until the tank is pretty much empty!

 

John

Link to comment
Share on other sites

  • 1 month later...

My Monte I just bought today my fuel gauge is reading past full im thinking I have a short somewhere, I unplugged the connector in the trunk and no change. If someone can send me a wiring diagram I would really appreciate it.

Link to comment
Share on other sites

Evan,

 

Not sure which page you need. It may be the page shown below.

 

P1042140.jpg

 

If not, here's the link to a photo file showing each page of the wiring manual for a 1970 MC:

 

http://s912.photobucket.com/albums/ac329/dbengtson4/Wiring%20Diagram%20Manual/

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...