monte70z20

Checked today's exchange and asking price works out to about $18000 USD.

I think its just the normal amount of fuel. Seems to me I've seen this before but what do I know... just guessing🤪

https://www.facebook.com/marketplace/item/6723172741118099/?ref=browse_tab&referral_code=marketplace_top_picks&referral_story_type=top_picks

Beat me to the punch Joe. Thanks for posting.

Rob: Were you at least able to still see the pictures?

Saw this on FB. I know it's not what you're looking for but an interesting project. https://www.facebook.com/marketplace/item/1625391737866955?ref=category_feed&referral_code=undefined&referral_story_type=listing&tracking={"qid"%3A"-2427507610523234966"%2C"mf_story_key"%3A"24860676106910567"%2C"commerce_rank_obj"%3A"{\"target_id\"%3A24860676106910567%2C\"target_type\"%3A0%2C\"primary_position\"%3A0%2C\"ranking_signature\"%3A4006759294204764308%2C\"commerce_channel\"%3A504%2C\"value\"%3A4.0596177141693e-5%2C\"candidate_retrieval_source_map\"%3A{\"24860676106910567\"%3A111}}"%2C"ftmd_400706"%3A"111112l"}

Luckily that's not an (Expensive) issue for me...yet! Premium pump gas seems to be fine (91 Octane).

Nothing like the smell of fresh exhaust on a chilly winter's day, too!!

Maybe a good project. Price seems reasonable - https://www.hagerty.com/marketplace/1e7275dr/cpmonte/29d99801-d035-4d2f-a09a-9348085b0d2e

Looking forward to it. Hope you start feeling better!

Hopefully the video uploaded. Too nice a day to not take her out for a little rip around the block. Roads were dry so hopefully salt not an issue. Monte_20240204.mp4

Looks very nice and clean - https://www.hagerty.com/marketplace/poaqlj03/robietompkins/f101b3ee-5c54-416e-ae19-ea6f193b4536

Not sure if this is the correct piece but you can try these places to see what they have: https://nationalcarburetors.com/Chevrolet-1971-402-454-Rochester-4MV_p_1279.html https://quadrajetpower.com/chevrolet-1971-402-454-4-speed-quadrajet-7041201/

Needs work but might be a good entry vehicle for someone. https://www.hagerty.com/marketplace/u6weut7f/bigbern/3816df48-2eda-4091-8f3a-faea5719bc27

Tom: I'm not sure if this is what this conversation is about but I ended up modifying mine to make it fit my "Champion Cooling" 4 core rad. It is pretty rough but it works and I'm sure you could do a better job than me. I'm not that skilled with a cut off saw, so it came out "WAY" less than perfect. I also modified the rad support in similar fashion. Also FYI, if you haven't bought the insulator pads, I previously bought a set of insulators for a stock 4-core rad, for a '70 Monte, and the short/top pieces did not sit properly on the after market aluminum 4-core. I ended up needing the 2 (stock) longer pieces that the rad sits on (bottom pieces). This is what allowed the rad and the "radiator top plate" to sit properly with the aftermarket rad. Hope this with the attached pictures makes sense.

Steve, wishing you a speedy recovery. My wife is going through some difficult times with her back. So I have some idea what you have gone through. I hope all goes well and you get back to 100%. All the best!

Was bored so started "surfing" and came across a bunch of Monte articles on the Chevy Hardcore website. Not sure if anybody has seen the Youtube video in the article below but I thought I'd post the link here if anybody wants to take a look at this apocalyptic creation. Also saw a nice review of Dan's "slap stick" conversion and pictures of what looked like FGMCC cars lined up at a couple of the Carlisle events. https://www.chevyhardcore.com/news/video-mad-max-ing-it-in-ron-griffiths-eclectic-monte-carlo/

Makes sense now. Thanks a bunch!!!👍

Thanks for the very quick reply. Can you elaborate? What is it that makes them different are the mounting pin positions different? I have one for a '71 but my Monte is '70. When I look at "Parts Place" they look the same. Appreciate the help.

Hoping this is the forum for this post. Are the 1970 and 1971 "BY CHEVROLET" emblems that mount under the rear "Monte Carlo" the same/interchangeable?

I just read these latest posts and now have to go sit in my chair for a nap. The thought of riding my bike made me tired...lol!

Jim I will PM you shortly. Thanks, John

Steven: I have a set of buckets and a horseshoe shifter that I'd be willing to part with. I will PM you the details.

Robert: I'm going to PM you with some items I'm looking for that you may have.

Just finished booking my room. Can't wait. Joe you can relax now🤣😜