Daryl Posted May 27, 2014 Share Posted May 27, 2014 I just wanted to share the voice of my build. Thanks to alot of people here who unknowingly helped me out by posting a ton of info on their motors. Couldn't have done it without you. This was my first performance build I have ever done. I have built stock motors before but nothing like this. I'm very happy with the way she runs and sounds. I have a few more bugs to work out and some fine tuning. This run was after I had to adjust my dizzy depth as it was at first to deep and made a terrible gear whine. I'm still smiling every time I listen to the clip. Can’t wait to drive the car when she is all put together. Quote Link to comment Share on other sites More sharing options...
LostnFound Posted May 27, 2014 Share Posted May 27, 2014 Sounds serious. Quote Link to comment Share on other sites More sharing options...
Patrick Sheean Posted May 28, 2014 Share Posted May 28, 2014 Gotta love that sound! Quote Link to comment Share on other sites More sharing options...
CrazyDavey Posted May 28, 2014 Share Posted May 28, 2014 congrats... Quote Link to comment Share on other sites More sharing options...
7tonemonte Posted May 29, 2014 Share Posted May 29, 2014 Sounds great! What a feeling to hear that new. Motor run Oh yea....... Your camera fell over Quote Link to comment Share on other sites More sharing options...
Daryl Posted May 29, 2014 Author Share Posted May 29, 2014 Yeah 5 minutes trying to get that thing to stand up and soon as I walked away it fell over. Oh well the audio was the important thing. Quote Link to comment Share on other sites More sharing options...
dbreese Posted May 29, 2014 Share Posted May 29, 2014 Sounds ok for a B/B. I joke, I joke!!!lol That engine sounds wicked and will motivate the Monte for sure!! Great job on the build!! David Quote Link to comment Share on other sites More sharing options...
Daryl Posted May 30, 2014 Author Share Posted May 30, 2014 It should run okay, here are my stats; Herbert Solid roller 620i 650e 280 290 dur 454 .030 over decked and line bored Forged lower 4.25 stroker crank and 6.385 rods Diamond forged pistons, total seal rings 10.85:1 cr ProMaxx rec port heads, Herbert extreme duty valves, Harland Sharp rockers, super 7 titanium retainers and locks Crane electropolished Springs Pro Comp single plane polished intake Holley 4150 reworked 850 now 930 MSD ignition Reworked 4l80e with hardened shafts, Rev Maxx converter 3200 stall,TCI controler Eaton posi, 4.10 Richmond gears and Moser forged axles Quote Link to comment Share on other sites More sharing options...
Boots Posted May 30, 2014 Share Posted May 30, 2014 a little rumble in the concrete jungle Quote Link to comment Share on other sites More sharing options...
Daryl Posted May 30, 2014 Author Share Posted May 30, 2014 Now I need a good drive shaft and then my chassis and drivetrain will be all most done. Quote Link to comment Share on other sites More sharing options...
dbreese Posted May 30, 2014 Share Posted May 30, 2014 Now I need a good drive shaft and then my chassis and drivetrain will be all most done. Denny's, Empire and Mark Williams are some good sources for driveshafts. David Quote Link to comment Share on other sites More sharing options...
Mike 57 Posted May 30, 2014 Share Posted May 30, 2014 Denny's did mine, no complaints. Engine sounds great! Quote Link to comment Share on other sites More sharing options...
Daryl Posted May 30, 2014 Author Share Posted May 30, 2014 What's a good drive shaft cost nowadays? What did you guys go with aluminum, steel, carbon fiber? Quote Link to comment Share on other sites More sharing options...
Mike 57 Posted May 30, 2014 Share Posted May 30, 2014 Mine is probably overkill. It is one of their "Nitrous Ready" 3.5 inch shafts with chrome moly yokes and 1350 solid U joints. I think it was over 600 and they will replace it if I ever break a weld or twist the shaft. Quote Link to comment Share on other sites More sharing options...
footballubet Posted May 31, 2014 Share Posted May 31, 2014 Sounds great! That should move the Monte with no problem. Quote Link to comment Share on other sites More sharing options...
70 Iron Posted May 31, 2014 Share Posted May 31, 2014 Sounds very nice Daryl,Great job. Terry Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.